Panasonic 30 - Toughbook - Core 2 Duo Service Manual page 46

■ Assembly of the Pad PCB and SW PCB
(Note) Arrow without specified measurement: 0 to 0.5 mm
PAD PWB ASSY
PAD MAIN FPC Ass'y
PAD-Main FPC
Fold back
Tape
■ Putting of the TP Bottom Tape
9.2.8. Setting the left LED PCB and right LED PCB
1. Connect the Cable to the Connector. (CN806)
2. Fix the left LED PCB.
3. Connect the Cable to the Connector. (CN801)
4. Fix the right LED PCB.
5. Attach the two Release Papers.
6. Attach the Palm Rest Ass'y.
PAD PWB
SW FPC
PAD MAIN FPC ASSY
No direction when inserting
Insert
Use the fixing JIG for the pressured portion
when the cables are inserted.
Thermistor
Insert to the connector
Stiffening Plate Side
0 1mm
0 1mm
SW PCB Ass'y
Front side
Match to the upper left corner. 0 to 0.5mm
Screw
Back side Power SW Cable
Power Cable Cushion
Wrap around the Cable.
8 2mm
SW PCB Ass'y
Ensure that the direction
Operation Tape
is right when attaching.
The Connector bracket is
Match the edge
on the back side.
and attach it.
Avoid coming off of the LED part,
or running over the LED part.
Release Paper
left LED PCB
Connector(CN806)
right LED PCB
46 / 90
LED(R) FPC
Insert
Insert
SW PCB
Operation
Sheet
Screw
Release Paper
Connector(CN801)