Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E
Table 13. 7-Pin SATA Connector Pinout (J2, J3, J4, J5, J6)
3.4.3.3
Hot-Swap SATA Drive Connectors
The SATA drive interface combines both SATA and power signals into a single connector. The
pin-out of the drive interface connector is the same as a standard ATA and power connector.
The following table provides the pinout.
3.4.3.4
Slim-line Floppy Drive Connector
With a slim-line floppy drive installed into either the slim-line drive bay or the optionally installed
floppy drive kit located in one of the hard drive bays, the floppy cable from the drive is routed to
the legacy floppy connector on the baseboard floppy connector on the Intel Server Board
SE7221BK1-E.
3.4.3.5
Slim-line CDROM / DVD Interface Assembly
When a CDROM or DVD drive is installed into the slim-line peripheral bay, the drive cable is
routed from a connector on the drive interposer card, to the baseboard legacy IDE connector on
the Intel Server Board SE7221BK1-E.
Revision 1.0
Pin
Name
1
GND
2
DRV_RX_P
3
DRV_RX_N
4
GND
5
DRV_TX_P
6
DRV_TX_N
7
GND
8
GND
9
GND
Table 14. 22-Pin SATA Connector Pinout
Name
Pin
Pin
GND
1
13
DRV_RX_P
2
14
DRV_RX_N
3
15
GND
4
16
DRV_TX_P
5
17
DRV_TX_N
6
18
GND
7
19
P3V3
8
20
P3V3
9
21
P3V3
10
22
GND
11
23
GND
12
24
Name
GND
SCSI+5V
SCSI+5V
SCSI+5V
GND
Unused
GND
SCSI+12V
SCSI+12V
SCSI+12V
GND
GND
- 41 -
Need help?
Do you have a question about the SR1425BK1 - Entry Server Platform and is the answer not in the manual?
Questions and answers