Using the Setup Menu
Using the Setup Menu
•
•
•
•
•
•
•
•
•
•
•
•
Choosing a Menu System Language from the Language Menu
You can choose one of 11 languages for use in the calibration menu (the OSD).
This procedure assumes that your remote control and the front panel controls on your LCD display are
Procedure
From the main menu, choose Setup > Language.
To choose a language for use in the menu, use the Up and Down buttons.
Step 2
•
User Guide for Cisco LCD Professional Series Displays
4-12
Choosing a Menu System Language from the Language Menu, page 4-12
Adjusting Clock-based Settings from the Time Menu, page 4-13
Editing the 4-digit PIN from the Safety Lock PIN Menu, page 4-14
Adjusting Inverter Lamp Power Consumption Settings from the Lamp Control Menu, page 4-22
Working in the S/N Menu, page 4-22
Chapter 4
Adjusting Display Settings
OL-17986-01