Connecting The 1D Mk Ii N, 1Ds Mk Ii, 1D Mk Ii And A Computer - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Connecting the 1D Mk II N, 1Ds Mk II, 1D Mk II and a Computer

Attach the cable protector to the IEEE1394 interface cable (IFC-200D4)
provided with your camera, and then connect the camera and computer.
1
Connect the plug of the cable with the <
into the computer's IEEE1394 port.
For the location and direction of the IEEE1394 port, refer to the
computer User's Manual.
2 Attach the cable protector to the plug with the <
mark, and then connect to the <
your camera.
Connect with the < > mark on the plug facing the top of the
camera.
For cameras not provided with the cable protector, connect the
plug directly to the camera.
Image downloading preparation is now complete. Continue with
"Starting up EU" (p.9).
When connecting the interface cable plug to the computer and
camera, make sure you match the shape of the plug with the
shape of the IEEE1394 port before connecting. The camera or
computer may become damaged if connected incorrectly.
Although you can use the USB interface cable (IFC-400PCU)
> mark
provided with your camera to connect the camera and computer,
EU communication will not be possible. Use the IEEE1394
interface cable (IFC-200D4).
If your computer has a 4-pin type IEEE1394 port, you will need to
use a 4-pin – 4-pin type Canon interface cable (sold separately).
>
> terminal on
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
7 7