Cisco AIR-PCI340 Installation And Configuration Manual page 107

Chapter 5 Configuring the Client Adapter
Step 5 Perform one of the following:
• If you selected Use Temporary User Name and Password in
options:
–
–
–
• If you selected Use Saved User Name and Password in
a.
b.
c.
Step 6 If you work in an environment with multiple domains and, therefore, want your Windows login domain
to be passed to the RADIUS server along with your username, check the Include Windows Logon
Domain with User Name check box. The default setting is checked.
Note
Step 7 If you want to force the client adapter to disassociate after you log off so that another user cannot gain
access to the wireless network using your credentials, check the No Network Connection Unless User
Is Logged In check box. The default setting is checked.
In the LEAP Authentication Timeout Value field, enter the amount of time (in seconds) before a LEAP
Step 8
authentication is considered to be failed and an error message appears.
Range: 10 to 300 seconds
Default: 90 seconds
Step 9 Click OK to exit the LEAP Settings screen.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Use Windows User Name and Password—Causes your Windows username and password to
also serve as your LEAP username and password, giving you only one set of credentials to
remember. After you log in, the LEAP authentication process begins automatically. This option
is the default setting.
Automatically Prompt for LEAP User Name and Password—Requires you to enter a
separate LEAP username and password (which are registered with the RADIUS server) in
addition to your regular Windows login in order to start the LEAP authentication process.
Manually Prompt for LEAP User Name and Password—Requires you to manually invoke
the LEAP authentication process as needed using the Manual LEAP Login option from the
Commands drop-down menu. You are not prompted to enter a LEAP username and password
during the Windows login. This option might be used to support a software token one-time
password system or other systems that require additional software that is not available at login.
Enter a username and password in the appropriate fields.
Usernames and passwords are limited to 32 ASCII characters each. However, if a
Note
domain name is entered in the Domain field, the sum of the username and domain name
is limited to 31 ASCII characters.
Re-enter the password in the Confirm Password field.
If you wish to specify a domain name that will be passed to the RADIUS server along with your
username, enter it in the Domain field.
If you selected to use a saved username and password but do not check the Include Windows
Logon Domain with User Name check box, the Domain field becomes unavailable, and a
domain name is not passed to the RADIUS server.
Setting Network Security Parameters
Step 4, select one of the following
Step 4, follow the steps below:
5-37