Configuration For Bridge Mode - TP-Link TD-W8901G - Wireless Router Quick Installation Manual

D. Configuration For Bridge Mode
This page will then display.
Enter the Bridge information
provided by your ISP.
Click NEXT
After completing the above configuration, please proceed to
Settings Configuration
Wireless Settings Configuration
This page will then display.
Keep the default
Activated. If you want to disable
Access Point,
Deactived.
Create a unique and easy to
remember name for your wireless
network. You can also keep default
settings without the device being
affected.
Select an Authentication Type.
Select an Encryption Type.
Enter a Security Key using 8-64
characters.
Click NEXT
The wireless security is Disabled by default. You are suggested to select
Note
an Authentication
recommended.
After completing the above configuration, please proceed to
Complete.
setting:
please select
Type for
7
security settings.
Wireless
WPA2-PSK is
Quick Start