Summary of Contents for JVC TM-950DU - Professional Monitor W/sdi
Page 1
COLOR VIDEO MONITOR TM-950DU INSTRUCTIONS For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. : TM-950DU UNDER PULSE COLOR BLUE POWER VOLUME PHASE CHROMA BRIGHT CONTRAST Model No.
Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS FCC INFORMATION (U.S.A. only) WARNING: CAUTION: Changes or modifications not approved by TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT JVC could void the user’s authority to operate the...
CONTROLS AND FEATURES Front <Front Panel> UNDER PULSE COLOR BLUE POWER VOLUME PHASE CHROMA BRIGHT CONTRAST SCAN CROSS CHECK STAND BY NTSC/525 SYNC PAL/625 16:9 V.HOLD NTSC UNDER PULSE COLOR BLUE POWER VOLUME PHASE CHROMA BRIGHT CONTRAST SCAN CROSS CHECK STAND BY NTSC/525 SYNC...
Page 5
11 POWER switch 14 COLOR OFF switch Press this switch to turn the power on or set it to stand-by Selects the screen mode (color or B/W). Useful when you mode. want to check the white balance. ON ( : Power is turned on and the power (—) : Color screen indicator lights.
Page 6
CONTROLS AND FEATURES (cont'd) Rear < Rear Panel > VIDEO INPUT A SET UP VIDEO INPUT B INPUT A CUT OFF VIDEO VIDEO INPUT B INPUT B VIDEO DRIVE VIDEO EXT SYNC AUDIO EXT SYNC NORMAL FAST AUDIO TALLY/ REMOTE To AC outlet NORMAL (120 V AC, 50 Hz/60 Hz)
Page 7
24 SDI terminals 22 AFC switch Input (IN) terminal for component series digital signals Selects the AFC (Automatic Frequency Control) time and active through output (OUT) terminal. constant for the horizontal sync circuit. Correct the skewed portion of the picture. Notes: NORM position : Normal mode FAST position : Fast mode (fast: smaller time constant)
BASIC CONNECTION EXAMPLE • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. •...
Page 9
SDI Connection Example Component serial digital signal VIDEO INPUT A (Signal cable) Device INPUT B outputting Device component receiving Component serial serial digital component digital signal signal (SMPTE serial digital (Signal cable) VIDEO 259M-compliant) signal (SMPTE INPUT B VIDEO/SDI switch: VIDEO Active Through Output 259M-compliant)
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures No power supply.
SPECIFICATIONS 7 Type : Color video monitor AUDIO A 1 line 7 Color system : NTSC, PAL (monaural), RCA pin x 2 7 Picture tube : 9" measured diagonally, 0.5 V(rms), high-impedance flat-square type, (bridge connection possible) 90° deflection, in-line gun, AUDIO B : 1 line (monaural), RCA pin x 2 vertical line trio type (phospher...
Page 12
JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Vallery Road Wayne, NJ07470 JVC CANADA INC. Printed in Thailand 21 Finchdene Square, Scarborough Ontario M1X 1A7 LCT0774-001A-H 0300-Tu-U-JMT 2000 VICTOR COMPANY OF JAPAN, LIMITED...