Table of Contents
Advertisement
8
Memory slots for microprocessor 2 (some
slots might with installed memory modules)
Note: * denotes that this illustration only shows the server models with four hot-swap hard disk drives. There are
also server models that support up to five non-hot-swap hard disk drives.
Locating parts on the system board
Figure 7 "Locating major parts on the system board" on page 15 shows the locations of the major parts
on the system board.
Figure 7. Locating major parts on the system board
1
Main power connector
2
Front panel connector
3
Memory slot - microprocessor 1 DIMM channel
B1 (CPU1 DIMM CHB1)
4
Memory slot (CPU1 DIMM CHB2)
5
Memory slot (CPU1 DIMM CHA1)
6
Memory slot (CPU1 DIMM CHA2)
7
System fan 2 connector
8
Microprocessor 1 heat sink and fan assembly
connector
9
Microprocessor power connector
10
Microprocessor 1
11
Microprocessor 2 socket (the second
microprocessor is optional)
16
System board
34
33
32
31
18
19
20
21
22
23
24
25
26
27
28
SATA connector 0
SATA connector 1
SATA connector 2
SATA connector 3
SATA connector 4
Internal dual-port USB 2.0 connector (ports 0-1)
Internal dual-port USB 2.0 connector (ports 2-3)
SATA connector 5
PCI Express x4 slot
PCI card slot
Remote management module 3 (RMM3) connector
.
Chapter 4
Locating parts, controls, LEDs, and connectors
15
Advertisement
Table of Contents
