Scanning In The Advanced Mode - Canon CanoScan D1230UF User Manual

chapter 5
Scanning an
Original
Top Page
Glossary
Contents
Index

Scanning in the Advanced Mode

This is a brief overview of the general procedure for previewing and
scanning an original in the Advanced Mode.
1.
Place the original on the scanner.
For details about positioning the original on the
scanner, see your scanner user's manual.
Note
2.
Start the software application you are going to use.
3. Confirm that your scanner is selected in the Select Source (or its
equivalent) dialog box. ( p.65)
4.
Start ScanGear CS-U as a TWAIN driver.
The mothods for starting TWAIN drivers vary between application
programs. See the respective manuals for application programs.
70