Panasonic WV-CW504SE Installation Manual page 35

Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
**CAMERA SETUP**
SCENE1
ALC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
BW MODE
i-VMD
RET TOP END
Note:
• If the top screen of the setup menu is
called up with the operation buttons while
a camera image is displayed, the setup
mode is always "DISABLE" to prevent
operation errors. To configure the settings
in the setup menu, change the setup
mode to "ENABLE".
• The cursor is a reversely highlighted part.
ALC
OFF
ON(HIGH)
OFF
ATW1
HIGH
AUTO1
Step 4
Perform the settings for each item.
• Selection of setting item:
Press the up or down button to move the
cursor.
• Change of settings:
Press the right or left button.
• Display of advanced setup screen:
Press the setting button when "O" is
attached to the target setting item.
• Return to previous setup screen:
Move the cursor to "RET" and press the
setting button.
• Return to the top screen:
Move the cursor to "TOP" and press the
setting button.
Step 5
To return to the camera image screen, move
the cursor to "END" and press the setting but-
ton.
35