Installation Requirements; Location Requirements; Tools And Parts - Whirlpool XHP1550WR Installation Instructions Manual

INSTALLATION REQUIREMENTS

loCatIon RequIRements

note: If the washer/dryer and pedestal assembly are located in
a garage, 3" (76 mm) must be added under the pedestal so that
the washer/dryer is 18" (458 mm) above the garage floor.

tools and PaRts

Gather the required tools and parts before starting installation.
tools needed:
Utility knife
Level
Pliers or slip-joint pliers
1/4" nut driver
2
1/4" hex-head ratchet
or open-end wrench
9/16" open-end wrench
Bucket
5/16" hex-head ratchet
or nut driver
additional Items needed:
Towel
Parts supplied:
Four #12 x 5/8" hex-head
sheet metal screws
Sponge
Drawer divider