Battery
Your OneTouch
®
UltraMini
(or equivalent). Replacement batteries can be found in most stores where batteries
are sold. Your meter comes with the battery already installed.
The meter shows a battery icon
the condition of the battery.
When the battery icon first appears along with
the unit of measure, there is enough power for a
minimum of 100 more tests. You should replace
the battery as soon as possible.
When the battery icon appears by itself, there is
not enough battery power remaining to perform a
test. You must install a new battery before using
your meter.
Replacing the battery
Step 1
Remove the old battery
Start with the meter off. Open the battery door and pull up on the
battery ribbon.
™
Meter uses one 3.0 Volt CR 2032 lithium battery
in the far right-hand side of the display to indicate
35
Need help?
Do you have a question about the ONETOUCH ULTRAMINI and is the answer not in the manual?
Questions and answers