Updating A Deep Freeze Configuration File - FARONICS DEEP FREEZE ENTERPRISE 6 Manual

Updating a Deep Freeze Configuration File
Complete the following steps to update the configuration on one or many workstation(s) with the
settings of an existing .rdx file.
1. Right-click on the workstation(s) and select Update Configuration, as shown below.
2. A message appears asking for an existing .rdx file to be located.
3. Click OK.
A standard Open File dialog appears to select an .rdx file.
4. Locate a file and click Open to update the configuration on the selected workstation(s) with
the settings in the .rdx file.
Click Cancel to cancel the configuration update.
If the Network options in the new configuration have changed, the workstation(s) may
lose communication with the existing Enterprise Console. If communication with the
workstations is lost, check the Network settings on the updated workstations to ensure
that the port numbers and/or IP address of the Console have not been changed.
Changes to passwords take effect immediately. All other changes take effect after each
workstation is restarted.
ThawSpace and/or Frozen Drives cannot be changed through updating the
configuration file.
0