Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 22

ASA Chassis Panels
Figure 1-5
Figure 1-5
LED
1
I/O slot
2
Thumbscrew
3 Management 0/0 port
4 RJ-45 ports
5
Power supplies
6
USB ports
7 Console port
Cisco ASA 5500-X Series Hardware Installation Guide
1-10
shows the rear panel ports for the ASA 5545-X and ASA 5555-X.
Rear Panel Ports for the ASA 5545-X and ASA 5555-X
1
Description
Slot for the optional I/O Card. If you have a fiber I/O card, use SFP
modules to connect (not included).
(See the
The screw that tightens and loosens the chassis cover.
Indicates the Gigabit Ethernet interface that is restricted to
management use only. Connect with an RJ-45 cable.
(See the
section on page
Indicates the Gigabit Ethernet customer data interfaces.
The top row port numbers are (from left to right) 7, 5, 3, 1.
The bottom row port numbers are (from left to right) 6, 4, 2, 0.
Slots for the primary power supply that ships with the device and the
optional redundant power supply.
Indicates the two USB standard ports.
(See the
Indicates the console port that directly connects a computer to the
ASA.
2 3
4
7 6
"Gigabit and Fibre Channel Ports" section on page
"Management 0/0 Interface on the ASA 5500-X Series"
1-3.)
"External USB Support" section on page
Chapter 1 ASA Chassis Overview
5
5-4.)
1-2.)