SPA and Wireless IP Phone Field Reference
SPA932 Status
SPA932 Status
Cisco SPA and Wireless IP Phone Administration Guide
For more information, see
on page
175.
Unit 2
See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second SPA932 unit.
Keywords and values are case-sensitive. The configuration script is described in
"Setting Up the SPA932 Attendant Console" section on page
This page provides two tabs to display the status of up to two SPA932 units that
are supported by a single SPA962:
•
Unit 1—Displays information about the first SPA932 unit.
•
Unit 2—Displays information about the second SPA932 unit.
Each tab provides the read-only fields described in the following table:
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
"Setting Up the SPA932 Attendant Console" section
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After
the subscription expires, the SPA932 automatically
requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is powered on and
connected or not.
Displays the length of time the SPA932 waits to try
again if subscription fails.
Displays the version of the software currently running
on the unit.
Displays the name assigned to each key (1-32) on the
SPA932 unit.
B
175.
273