Table of Contents
Advertisement
Quick Links
Before using your headset for the first time
You must charge it continuously for about 2 hours, until the red indicator light turns off.
Please refer to the "Charging the BLUETREK® Metal Evolution" section of this manual.
Pair the headset with a mobile phone. Please refer to the "Pairing the BLUETREK® Metal Evolution"
section of this manual.
Introduction
The BLUETREK® Metal Evolution headset is a wireless headset based on the Bluetooth® tech-
nology. It complies with Bluetooth® 2.1 protocol, supporting Headset and Hands-free profile.
The BLUETREK® Metal Evolution headset has 3 buttons:
· "TALK" button (main button)
· "Vol +" button
· "Vol -" button
"Vol +" button
"Talk" button
"Vol -" button
BLUETREK METAL EVOLUTION I 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BlueTrek METAL EVOLUTION
Summary of Contents for BlueTrek METAL EVOLUTION
- Page 1 You must charge it continuously for about 2 hours, until the red indicator light turns off. Please refer to the “Charging the BLUETREK® Metal Evolution” section of this manual. Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® Metal Evolution” section of this manual.
- Page 2 Charging the BLUETREK® Metal Evolution Please insert the adapter in the main body. Then connect the USB connector to a powered USB slot. During the charge, the red Bluetooth indicator is switched on. The indicator light will turn off when the charge is complete.
- Page 3 A beep (3 tones) can be heard in the speaker then release the TALK button. Pairing the BLUETREK® Metal Evolution Before using the BLUETREK® Metal Evolution headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.
- Page 4 “Talk” button go the pairing mode automatically.) Once the mobile phone detects the headset, a “BLUETREK METAL” message will be dis- played. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes” or “ok”.
-
Page 5: Making A Call
This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more. Answering a call When the headset rings, press once on the TALK button to take the call. -
Page 6: Adjusting The Volume
When the microphone is muted, press and hold the VOL+ or VOL - button for approximately 3 seconds. The periodic tone will end. Transferring a call from BLUETREK® Metal Evolution to the mobile phone With a phone in Headset Profile During an active call, to transfer it to the phone, simply turn off your headset. -
Page 7: Call Waiting
Transferring a call from the mobile phone to the BLUETREK® Metal Evolution With a phone in Headset Profile Switch on your headset. With a phone in Hands-Free Profile During an active call on the mobile phone, double click the TALK button. - Page 8 Wearing the BLUETREK® Metal Evolution Two different sizes of ear hooks are included in the pack to suit your ear size. Fitting the Earbud 6 different sizes of Earbud are included in the pack to suit your ear size. You can adjust the Earbud position that you feel the most comfortable.
-
Page 9: Multi-Point Function
Multi-point function BLUETREK® Metal Evolution supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. Please see the instructions as below: 1.Pair the headset to the mobile A(please refer to “pairing” section) 2.
Need help?
Do you have a question about the METAL EVOLUTION and is the answer not in the manual?
Questions and answers