Hardware Setup - Nokia 5120 - Cell Phone - AMPS User Manual

Select the correct modem
Each fax application typically has a setup menu that can be used to alter the settings for your modem, as well as define how and
when calls are to be received (for example: immediately, on the third ring, etc.). This menu may also provide you with a list of
available modems that you can use when sending and receiving fax calls.
Use your fax program's settings menu to select your Nokia phone as the active fax modem.

Hardware setup

Use the modem properties dialog box of your fax software to confirm the following settings:
• Communications port - COMn (where n=COM port number assigned to your phone)
• Initialization - 19200 bps
• Modem type - Class 2.0
• Flow control - Hardware
Notes about fax calls
by pressing your phone's
• Avoid terminating the fax call
and could cause loss of data.
• Fax calls cannot be initiated using your phone's keypad. All fax calls must be initiated using your fax software.
• Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into
the dialing string.
Configure your data and fax software
key. This may cause your fax application to temporarily lock up
[ 40 ]
11