Yamaha RX V3900 - AV Network Receiver Firmware Update
Firmware upgrade instructions
Hide thumbs
Also See for RX V3900 - AV Network Receiver:
- Owner's manual (169 pages) ,
- Addendum (2 pages)
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
February, 2010
Subject: RX-V3900 Firmware Update ver. 1.11
Yamaha is pleased to offer this firmware update to ensure the best possible
performance for your Yamaha RX-V3900 AV Receiver.
This firmware improves HDMI standby through function.
The following pages contain the firmware update instructions for the RX-V3900.
You can easily update the latest firmware either by using an USB thumb drive, or
by connecting the receiver to the Internet. In order to properly execute the update,
read all instructions carefully. The following links will also lead you directly to the
beginning of each individual section of the instructions.
Click here to confirm the current firmware version before the update.
Click here for the firmware update by USB thumb drive.
(Update by Network is recommended if your receiver is connected to the internet)
Click here for the firmware update by Network.
Click here for the firmware version confirmation after update.
Click here for troubleshooting.
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
Firmware Update Procedure for RX-V3900
Page.1 of 6
Advertisement
Related Manuals for Yamaha RX V3900 - AV Network Receiver
Summary of Contents for Yamaha RX V3900 - AV Network Receiver
- Page 1 Click here for troubleshooting. < IMPORTANT NOTICE > Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha.
-
Page 2: Confirming The Firmware Version
Firmware Update Procedure for RX-V3900 Confirming the firmware version Step1: Set the MASTER ON/OFF button on the front panel to OFF, and confirm that the AC power cable is properly connected to an outlet. Step2 While pressing the STRAIGHT button, press (and release) the MASTER ON/OFF button and then keep pressing the STRAIGHT key until “ADVANCED SETUP”... - Page 3 (Formatting by FAT system is required in advance). - USB thumb drive, with enough free space to store over 16 MB. - Firmware file provided by YAMAHA,”RXV3900-xxxx.bin”. Step1: Delete any existing files in the USB thumb drive. Step2: Copy the downloaded firmware “RXV3900-xxxx.bin” into the root directory of the USB thumb drive.
- Page 4 Firmware Update Procedure for RX-V3900 Step5 Rotate the PROGRAM selector counterclockwise to select “FIRM UPDATE USB”. Step6 To start the firmware update, press the MENU button. (Allow about 10 minutes for the update) Firmware reprogramming in progress Caution! Do not interrupt power or remove the USB thumb drive during the update. In case the power is accidentally cut off, refer to troubleshooting procedures on page 6 to recover.
- Page 5 Firmware Update Procedure for RX-V3900 Instruction for Network Update Network environment to be able to connect to the Internet via Requirement: RX-V3900. (For more information, refer to the owner’s manual.) Step1: Set the MASTER ON/OFF button on the front panel to OFF, and confirm that the AC power cable is properly connected to an outlet.
-
Page 6: Troubleshooting Firmware Update
Firmware Update Procedure for RX-V3900 Troubleshooting Firmware Update Case #1: Instead of “UPDATE OK”, an error message appeared on the display during updating or “ERROR” appeared when confirming the firmware version in Advanced Setup. To recover, retry the update procedure of USB/Network from first step again. In case the update has failed with network method, perform USB update method for recovery.