Install Microwave Oven - GE JEM31WF - Spacemaker II Microwave Oven Installation Instructions

❒
3 INSTALL BOTTOM DUCT
ASSEMBLY TO MICROWAVE OVEN
A Fasten the anti-tip bracket to the bottom
duct using four round-head screws.
Bottom Duct
REAR
Anti-Tip
Bracket
Round-Head
Screws (4)
Install the rear duct to the bottom duct
B
with one round-head screw.
Rear Duct
Remove all loose items, including the
C
turntable and turntable support, from the
microwave oven. Carefully turn the oven
upside down. Remove three screws (one
from control side, and two from bottom
rear) from microwave oven cabinet.
Place the bottom duct assembly on the
microwave oven bottom and fasten with
four round-head screws and the screws
just removed from the microwave oven.
Turn the microwave oven right side up,
being careful not to bend the bottom
duct flange.
Round-Head
Screws
Round-Head
Screws (4)
Installation Instructions
FRONT
Round-Head Screw
Screw from
microwave oven
Microwave oven
upside down
❒
4 INSTALL UPPER DUCT AND
TOP BRACKET
A Remove two screws from back of the
microwave oven. Peel off the adhesive
backing from the upper duct and secure
it to the microwave oven by pressing it
firmly down on duct. Fasten the upper
duct with the two screws just removed
from the microwave oven.
Screws
from
microwave
oven
Place the top bracket on top of the upper
B
duct, with the opening on the top bracket
lined up with the opening on the duct.
Attach the top bracket to the upper duct
using two round-head screws.
❒

INSTALL MICROWAVE OVEN

5
INTO CABINET
Slide the microwave oven part way into
A
the cabinet opening.
Plug in the
B
microwave
oven.
Anti-Tip
Brace
The anti-tip
C
bracket
must be
flat to the
cutout floor to engage correctly with the
anti-tip brace as shown. Carefully slide
the microwave oven back, engaging the
anti-tip brace. Make sure the power cord
is not mashed or cut as you slide the
microwave into place.
Center the microwave oven within the
D
cutout opening.
3
Round-Head
Screws
Anti-Tip
Assembly
Bottom Duct
Anti-Tip
Bracket