Clearing Cable Modem Counters; Clearing Cable Modem Reset - Cisco 7246VXR - uBR Router Software Configuration Manual

Chapter 5 Managing Cable Modems on the Hybrid Fiber-Coaxial Network

Clearing Cable Modem Counters

To clear the counters for the CMs in the station maintenance list, use one of the following commands in
cable interface configuration mode.
Command
clear cable modem mac-addr counters
clear cable modem ip-addr counters
clear cable modem all counters
Verifying Clear Cable Modem Counters
To determine if the counters in the station maintenance list are cleared, enter one of the following
commands. The station maintenance list counter is 0.
Command
show cable modem ip-address
show cable modem mac-address
show cable modem interface-address

Clearing Cable Modem Reset

To remove one or more CMs from the station maintenance list and reset the cable modem (or all CMs)
on the network, use one of the following commands in cable interface configuration mode.
Command
clear cable modem mac-addr reset
clear cable modem ip-addr reset
clear cable modem all reset
Verifying Clear Cable Modem Reset
To determine if the clear cable modem reset command has removed a CM from the station maintenance
list and forced it to start a reset sequence, enter the show cable modem command.
Be sure that you entered the correct CM IP address or
Tip
clear cable modem reset command. It might take up to 30 seconds for the CM to start the reset
sequence.
The clear cable modem reset command is useful if a Simple Network Management Protocol (SNMP)
Note
manager is not available, or if the CM is unable to obtain an IP address or respond to SNMP messages.
OL-2239-03
Purpose
Clears the counters in the station maintenance list for the CM
with a specific MAC address.
Clears the counters in the station maintenance list for the CM
with a specific IP address.
Clears the counters in the station maintenance list for all CMs.
Purpose
Displays the status of a CM identified by its IP address.
Displays the status of a CM identified by its MAC address.
Displays the status of all CMs on a particular upstream.
Purpose
Removes the CM with a specific MAC address from the
station maintenance list and resets it.
Removes the CM with a specific IP address from the station
maintenance list and resets it.
Removes all CMs from the station maintenance list and resets
them.
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Clearing Cable Modem Counters
when you typed the
MAC address
5-5