Connecting An Av Receiver Or Amplifier Using Audio Cables; Connecting An Av Receiver Or Amplifier Using A Digital Audio; Cable - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Connecting an AV receiver or
amplifier using audio cables
When connecting to a 7.1-channel compatible AV receiver or
amplifier – Connect using 4 audio cables (diagram below).
When connecting to a 5.1-channel compatible AV receiver or
amplifier – Connect using 3 audio cables (do not connect to the
surround back left and right terminals).
• After connecting, set Audio Output Mode to Multi-channel
(page 45).
Player's rear panel
AUDIO OUT ( 7.1 ch )
FRONT SUB WOOFER CENTER
R L R
CONTROL LAN(100) DIGITAL OUT
IN HDMI OUT
OPTICAL COAXIAL
MAIN(KURO LINK) SUB
FRONT SUB WOOFER CENTER
R L
LAN(100) DIGITAL OUT
OPTICAL COAXIAL
MAIN(KURO LINK)
To multi-channel
audio input
terminals
AV receiver or amplifier
Note
• For DTS-HD Master Audio and DTS-HD High Resolution Audio
signals, the DTS Digital Surround signals are converted to linear
PCM for output (page 54).
SURROUND SURROUND
L R L
BACK
VIDEO OUT
VIDEO
S-VIDEO
RS-232 C
COMPONENT VIDEO
P R P B Y
AUDIO OUT ( 7.1 ch )
SURROUND SURROUND
R L R
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
P P Y
SUB
R B
To component video input
terminals
Direction of
signal flow
Connecting an AV receiver or
amplifier using a digital audio cable
Connect either an optical digital audio cable or a coaxial digital
audio cable.
FRONT SUB WOOFER
R L
LAN(100) DIGITAL OUT
CONTROL
IN
OPTICAL COAXIAL
LAN(100) DIGITAL OUT
L
OPTICAL COAXIAL
AV receiver or amplifier
Note
• Dolby TrueHD signals are output as Dolby Digital signals or
signals converted from Dolby TrueHD to linear PCM (page 54).
• Dolby Digital Plus signals are output as Dolby Digital signals or
signals converted from Dolby Digital to linear PCM (page 54).
• DTS-HD Master Audio and DTS-HD High Resolution Audio
signals are output as the DTS Digital Surround signals or
signals converted from DTS Digital Surround to linear PCM
(page 54).
Player's rear panel
AUDIO OUT ( 7.1 ch )
CENTER SURROUND SURROUND
R L R L
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
MAIN(KURO LINK) SUB P R P B Y
VIDEO OUT
S-VIDEO
RS-232 C
COMPONENT VIDEO
P P
B R B
Use the BNC-RCA
adapter (included)
to connect an RCA
pin type cable.
To component video input
terminals
02
VIDEO
Y
Direction of
signal flow
19
En