Table of Contents
Advertisement
Quick Links
Clever Features, Contractor Friendly
AMIS1202P
2 x 120w Power Amplifier
Operating Manual
AMIS1202P, 2 x 120 Watt Power
Amplifier
Product Description
The AMIS1202P is a dual 120 watt power amplifier designed for commercial installations. The one unit
contains two independent 120 watt amplifiers for either stereo or dual zone applications. The AMIS1202P
can be used for either low impedance (4 or 8 ohm) or 25/70v line speaker systems per channel. The
amplifier can be mounted in a standard 19" equipment rack (rack ears supplied) or it can be used on a shelf
or table. The AMIS1202P features a line level input (with parallel output) per channel and is normally used
with mixers, mixer amplifiers or other power amplifiers.
Advertisement
Table of Contents
Related Manuals for AUSTRALIAN MONITOR AMIS1202P
Summary of Contents for AUSTRALIAN MONITOR AMIS1202P
- Page 1 19” equipment rack (rack ears supplied) or it can be used on a shelf or table. The AMIS1202P features a line level input (with parallel output) per channel and is normally used with mixers, mixer amplifiers or other power amplifiers.
- Page 2 In 24vdc operation the LED will always be on. Signal LED The green “Signal” LED’s located next to the On LED indicate that the AMIS1202P is receiving audio signal via its line level inputs. One LED is provided per channel. The signal LED’s are a simple way of trouble-shooting installations especially in multi amplifier projects.
- Page 3 24 Volt DC Power Inlet The AMIS1202P feature optional 24VDC power to run off a battery back-up if required. This is connected via the rear terminal strip. The front panel Power Switch will not switch DC power ‘on’ or ‘off’ in DC operation.
- Page 4 Important Safety Information 1. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit, use only the original factory packing. 2. Read all documentation before operating your equipment. Retain all documentation for future reference.
- Page 5 Australian Monitor Audio Inc is not responsible for damage to loudspeakers for any reason. 18. Do not ground any red (“hot”) terminal. Never connect a “hot” (red) output to ground or to another “hot” (red) output! 19. Non-use periods. The power cord of equipment should be unplugged from the outlet when left unused for a long period of time.
Need help?
Do you have a question about the AMIS1202P and is the answer not in the manual?
Questions and answers