Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tangent EXEO AMP
Summary of Contents for Tangent EXEO AMP
-
Page 2: Table Of Contents
CONTENTS SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS ACCESSORIES CONNECTIONS REMOTE CONTROL INFORMATION FRONT PANEL INFORMATION REAR PANEL INFORMATION OPERATION AND FUNCTIONS TROUBLESHOOTING GUIDE SPECIFICATIONS... -
Page 3: Safety Information
SAFETY INFORMATION Caution: To reduce the risk of electric shock, do not remove Cover (or back) No user-serviceable parts inside. Refer servicing to qualified service personnel. This lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninstalled “dangerous voltage”... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before the product is operated. Follow all operation instructions within this manual. RETAIN INSTRUCTIONS: The safety and operation instructions should be retained for future reference. HEED WARNINGS: Comply with all warnings on the product and in the operation instructions. - Page 5 IMPORTANT SAFETY INSTRUCTIONS 12. CONDITIONS REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. If the unit exhibits sudden unusual operation or unusual display characteristics. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water.
-
Page 6: Accessories
ACCESSORIES You should find the following accessories included: 1. Mains cord 2. RCA cord 3. Remote control + batteries AAA x 2 4. Operator’s Manual. -
Page 7: Connections
CONNECTIONS Connection precautions SUB OUT terminals When connecting, either disconnect the power plug from These terminals are used to connect to an active subwoofer. the power outlet or turn off the unit’s power using the Use pin-plug cords to connect the terminals to the INPUT POWER switch (if any). - Page 8 CONNECTIONS PHONO Connect the turntable’s output cord L (white) plug to the L PHONO terminal and the R (red) plug to the R PHONO terminal. If your turntable is equipped with a grounding cable, connect it to the unit’s GND terminal. But disconnect it if you notice increased humming.
-
Page 9: Remote Control Information
REMOTE CONTROL INFORMATION By using the provided remote control unit, the receiver can REMOTE CONTROL OPERATION RANGE be controlled from your listening position. To use the remote Use the remote control unit within a range of about 7 control unit, point it at the REMOTE SENSOR window of the meters (23 feet) and the angles of up to 30 degrees aiming receiver. - Page 10 23. AUX1 Press this button to active the AUX1 input. 1. System Off 24. AUX2 Press this key to turn off the EXEO AMP and any other EXEO Press this button to active the AUX2 input. product. 25. Phono Does not apply.
-
Page 11: Front Panel Information
FRONT PANEL INFORMATION Standby/On Press it to turn on the unit and press it again to turn it off. LED Indicator Is OFF when the amplifier is turned on. It is red when the amplifier is in standby mode. Input Rotate this knob clockwise or counterclockwise to choose the input source between: CDP, NET, DAB, AUX1, AUX2, PHONO. -
Page 12: Rear Panel Information
REAR PANEL INFORMATION PHONO: For connection of a turn table (Note: Additional ground terminal available above inputs) CDP: For connection of a CD player e.g. EXEO CDP NET: For connection of a NET tuner e.g. EXEO NET DAB: For connection of e.g. a DAB tuner AUX1 : For connection of a line level source PRE OUT: For connection of e.g. -
Page 13: Operation And Functions
The amplifier features a balance control with of -80dB attenuation for each speaker output. EQ – Direct Out When this function is on the Bass, Treble and Balance is bypassed. If Direct Out is set to off again, the EXEO AMP will remember the Bass, Treble and Balance settings. - Page 14 OPERATION AND FUNCTION HP Filter A highpass filter can be set on and off, to match the system with a active subwoofer. The corner frequency is 80Hz and it has a 12dB slope. PHONO The phono input can be set for MM and MC cartridges, the gain is 40 and 60dB respectively. Factory Reset The function brings back the unit to default settings.
-
Page 15: Troubleshooting Guide
TROUBLESHOOTING PROBLEM CAUSE/REMEDY No power when the unit is turn on - Switch on the current at the mains outlet socket - Check that the plug has been correctly inserted in the socket - The internal fuse has blown and must be replaced by a qualified service technician - The power cord has been damaged and must replaced No Sound - The unit has not been turned on... -
Page 16: Specifications
SPECIFICATIONS Parameter Value Note Power Standby Power Consumption 0.73Wrms Power Supply Rating 300Wrms Audio - Connectors Line Level Inputs Connectors RCA (Phono), gold plated Case = Gnd, Tip = Signal (CDP, NET, DAB, AUX1) 3.5mm Line Level Inputs Connector 3.5mm mini-jack, tin-plated Case = Gnd, Ring = R, Tip = L (AUX2) Line Level Outputs Connectors RCA (Phono), gold plated...
Need help?
Do you have a question about the EXEO AMP and is the answer not in the manual?
Questions and answers