Viewing A Pc Screen; Initial Set Pc Mode; When The Picture Is Unstable - Palsonic TFTV151 Owner's Manual

Viewing a PC screen

Initial set PC mode

When the picture is unstable

1
Power on your monitor by pressing the POWER button
on the main set or on the remote controller.
2
Use the PC button on the remote controller to switch to
the PC mode.
Then the PC screen is automatically set.
When a CD-Title runs, the music is output from
speakers.
(You can use an external speaker via the Audio Output
jack on the rear of the main set.)
1
Press the MENU button and the PICTURE menu is
displayed.
2
Use the VOL or VOL
FUNCTION menu.
3
Use the CH or CH
then press the SEL button. Then, the TRACKING
menu will be displayed.
4
Move to AUTO TRACKING, then press the SELECT
button. Then, the message "AUTO TRACKING
PROCESSING ..." appears on the screen to stabilise
the screen.
5
Press the MENU button repeatedly until the menus
disappear.
11
button to move to the
button to move to TRACKING,