Troubleshooting / Flow Charts; Factory Mode Procedure - Polaroid TLA-04641C - 46" LCD TV Service Manual

Note: Reseat all cables, check fuse by AC plug, perform a clear or reset in factory mode
and retest before ordering parts.
Can't power on your TV?
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is
designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the
illustration below. If the fuse is blown, replace with a 4 A 250 V – 5 x 20 mm Time Lag Fuse (Slow Blow) fuse.
Having trouble with setting your Parental Controls (V-Chip)?
The factory preset password is 0000. This password must be used first before setting your own personal
password. It is recommended that you keep your personal password in a safe place and away from children.
In the event you loose your personal password the master password is 8202. The master password overrides
all passwords. The master password can't be changed and should be kept in a safe place away from children.
Having trouble with setting Picture-in-Picture settings?
The Picture-in-Picture will not work using Component 1 and Component 2 as the input sources.
(1) Power on TV.
(2) Press volume up and channel up buttons on the TV simultaneously and release.
(3) Power off TV with remote or power button to exit.

3. Troubleshooting / Flow Charts

Factory Mode Procedure

14 www.polaroid.com