Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for GEONAUTE PEDOMETER DISTA F100
Summary of Contents for GEONAUTE PEDOMETER DISTA F100
- Page 1 Dista F100 TLL 24/07/06 16:01 Page 182...
-
Page 2: Limited Warranty
LIMITED WARRANTY GEONAUTE guarantees the initial purchaser of this device that it is free from any defects related to the materials or manufacture for a period of two years from the date of purchase. Please keep your receipt as proof of purchase. -
Page 3: Available Functions
Dista F100 TLL 24/07/06 16:01 Page 18 USE/PRECAUTIONS FOR USE Description of the device Description of normal conditions 1. Screen of use 2-line display of the 4 modes 2. MODE button Wear this pedometer as close as possible to your body's center of To alternate between the different display modes gravity, just to the right or left of your belt buckle. -
Page 4: Setting The Pedometer
Dista F100 TLL 24/07/06 16:01 Page 20 Setting step length SETTING THE PEDOMETER To use the distance counter (DIST), you must set the step length Note: while the pedometer is in setting mode, if no operation is car- beforehand. The more precisely you measure your step length, the ried out for 30 seconds, the pedometer exits setting mode automati- more reliable the distance counter will be. -
Page 5: Setting The Distance Unit
Dista F100 TLL 24/07/06 16:01 Page 22 Setting the distance unit USING THE PEDOMETER The distance covered can be displayed either in km or in miles. Positioning the device To select the display unit : Attach the device at waist level, to your belt, clothing, or equipment. - Press on the MODE button to select the DIST mode. -
Page 6: Technical Data
Dista F100 TLL 24/07/06 16:01 Page 24 Using the different modes Specifications Once it is properly fastened to your belt, the pedometer counts each 12/24 time with HH/MM/SS display step you take, from the very first step of walking or running. Step counter from 0 to 999,999 steps Distance covered from 0 to 9,999.99 km (0 to 6,209.99 miles) Press on the MODE button to display the various modes:... - Page 7 Dista F100 TLL 24/07/06 16:01 Page 26 Problems encountered Possible causes 1.1 There may be no battery in the device. 1 Nothing is displayed on the screen 1.2 The battery is positioned incorrectly in its compartment. Check the polarities. 1.3 The battery may be dead. If so, it must be changed. Please refer to the “Changing the battery” section. Launch an automatic troubleshooting procedure on the device, referring to the “Factory mode”...
-
Page 8: Factory Mode
Dista F100 TLL 24/07/06 16:01 Page 28 CONTACT Factory mode This mode can be used to check the device in case of malfunction. As we strive to continually improve the products we develop, we are To launch the device's troubleshooting procedure : interested in your feedback regarding the quality, the functionality - Press and hold the 3 MODE, SET and RESET buttons down simul- and the usage of our products.
Need help?
Do you have a question about the PEDOMETER DISTA F100 and is the answer not in the manual?
Questions and answers