Related Manuals for BESAFE IZI COMBI
Summary of Contents for BESAFE IZI COMBI
- Page 1 REARWARD- & FORWARD-FACING USER MANUAL ECE R44 04 GROUP WEIGHT 0+/1 0-18 kg 6m-4y...
-
Page 2: Table Of Contents
Thank you for choosing BeSafe iZi Combi. Vital information BeSafe has developed this seat with much care, to protect your • It is NOT ALLOWED to mount the seat in a front child during the next phase of her or his life. -
Page 3: Preparing To Install
Preparing to install Rearward-facing in the back or front seat: preparation Crucial parts Release handle head rest It is NOT ALLOWED to mount the seat in a front Belt clamp (2x) passenger seat WITH AN ACTIVATED AIRBAG. Adjustable head rest Harness shoulder straps Harness buckle When mounting in the back seat of the vehicle, push the... - Page 4 Second alternative: using the rails The floor support must go through the belt loop. The belt loop of the front seat must also be led into the hook on the floor support (2). Secure an anchor belt round each of Do not fasten the locking bolt yet.
-
Page 5: Rearward-Facing In The Back Seat: Installation
Fourth alternative: using the front seat Rearward-facing in the back seat: installation Join the 2 anchor belts together to With the anchor belts in place the installation can continue: make a single belt. Put the lock of Place the seat sideways into the car with the front brace belt 1 through the loop of the belt 2 towards you. - Page 6 Pull out the shoulder belt and make it into a loop (10a). Connect the anchor belts with the child seat. The anchor belts must be crossed over. Thread the loop through the metal part of the red belt block (10b). Tighten the anchor belts to their maximum (13).
-
Page 7: Rearward-Facing In The Front Seat: Installation
Rearward-facing in the front seat: Position the 3 point car belt. Place the hip belt over the base of the seat behind the belt guiding horns on each side. installation Fasten the car belt, click (16). Tension the shoulder belt. With the anchor belts in place the installation can continue: Place the seat sideways into the car with the front brace (16) -
Page 8: Removing The Seat
Forward-facing belt installation Move the front brace outwards with the ratchet. Continue tightening until the brace is pressed well into the back rest of It is NOT ALLOWED to mount the seat in a front the vehicle seat (19). passenger seat WITH AN ACTIVATED AIRBAG. When mounting in the back seat of the vehicle, push the front seat of the vehicle forward as much (19) -
Page 9: Positioning Of The Child
Positioning of the child Put the shoulder belt through the belt clamps. Make sure the belt is Position of the shoulder straps: too high (31) not twisted (29). Check that the shoulder strap slots are levelled with your child’s Push the seat firmly into the car shoulders (31). -
Page 10: Sleeping Position
Removing and refitting the cover Position the shoulder straps (34) over the orange marking at • Make sure that the harness straps are fixed in the right way, sides of the seat to keep the after fitting the cover. harness open while you position the child (34). -
Page 11: Cleaning Instructions
Refit the cover Cleaning instructions Pull the head rest in the highest position. Mount the head rest • The cover of the seat must be washed according to the cover and connect the hooks at the back side. Pull the harness instructions on the inside of the cover (40). -
Page 12: Important Advice
• BeSafe advises that child seats should not be bought or sold • The BeSafe iZi Up is a group 2/3 seat which can be used for second-hand. children from 15 till 36 kg, which covers the age group from •... -
Page 13: Guarantee
Guarantee • All BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child seats are tested periodically out of our continuous production in our test laboratory. Furthermore they are tested by independent test institutes. • Should this product prove faulty within 24 months of purchase...
Need help?
Do you have a question about the IZI COMBI and is the answer not in the manual?
Questions and answers