Resetting To Factory Defaults; Installation; What Comes With The Explorer 443S/443Sp - NorthStar EXPLORER 443S Installation And Operation Manual

4-9 Resetting to Factory Defaults

Important:
This option resets all of the following settings
and resets them to the manufacturer's default
settings.
Speed and distance are related. For example,
if knots are chosen as the speed units, then
distance is always measured in nautical miles.
To reset the fishfinder to the manufacturer's
default settings, power off the fishfinder. Then
hold and power on while holding it.
The message "RESET TO FACTORY DEFAULTS?"
appears. Press to select YES or NO. Then press
or to reset the trip log and exit.
GENERAL
Auto Gain ..................................................... ON
Auto Range ................................................... ON
Manual Gain ...................................................... 5
Bottom Lock .................................................. ON
K ey Beep ........................................................ ON
Contrast ............................................................... 6
Backlighting .................................................... 10

5 Installation

Correct installation is critical to the performance
of the Explorer 443s/443sp. There are two
components to install, the display unit and the
transducer. It is vital to read the entire installation

5-1 What comes with the Explorer 443s/443sp?

Standard configuration
· Explorer 443s/443sp display unit.
· Power cable.
· Mounting bracket (screws included).
· Warranty registration card.
· This manual.
· Transducer (includes cable kit and screws).
· Transducer Installation Manual.
· Screws.
Northstar Explorer 443s/443sp Installation and Operation Manual
UNITS
Temperature ..................................................... °F
Depth ............................................................ Feet
Speed .............................................................. KN
ALARMS
Shallow Alarm ............................................. OFF
Shallow Alarm Value ................................. 10 ft
Deep Alarm .................................................. OFF
Deep Alarm Value ................................... 60 ft
Fish Alarm ..................................................... OFF
Temp. Change Alarm ............................... OFF
Temp. Change Alarm Value ............... 5.0 °F
Temp. Alarm ................................................. OFF
Temp. Alarm Value ................................. 80 °F
Low Battery Alarm ................................... OFF
Battery Alarm Value ...................... 11.5 Volts
FISH SYMBOL ....................................
INSTALL
Keel Offset ................................................. 0.0 ft
Fish Filter .................................................
section of this manual and the documentation
that comes with the transducer before
attempting installation.
Unit
Screws
Transducer
Mounting
bracket
Explorer 443sp
Power cable
23