Change The Sounder's Speed Filter; Instruments; Create An Instrument Panel; Add An Instrument - NorthStar 8000I Install Manual

Sounder Speed Offset
4. The
enter the difference between the displayed speed and the actual speed.
5. The new setting is applied immediately to all the Sounder screens.
6. When you are finished, select

10.16.4 Change the sounder's speed filter

The transducer usually displays a speed readout every two seconds. If you'd prefer to see the
readout averaged out over a different time period, use the speed filter offset to specify the
time period.
To change the speed offset:
1. Select
2. Select
3. Select
Sounder Speed Filter
4. The
enter the difference between the displayed speed and the actual speed.
5. The new setting is applied immediately to all the Sounder screens.
6. When you are finished, select

10.17 Instruments

You can:
choose how to view the instruments
•
rename an instrument panel
•
select the color scheme for an instrument panel
•
change the layout of the instrument panel
•
add a new instrument to a panel
•
resize an instrument on a panel
•

create an instrument panel

•
change the appearance of an instrument
•
delete an instrument from a panel
•
delete an instrument panel
•
10.17.1 Create an instrument panel
Use this to create an instrument panel. You can create and store a maximum of 100
instrument panels, to suit different activities.
To create an instrument panel:
1. Select
Return
2. Select
3. Select
onscreen keyboard, and select
4. Now you can add each new instrument (see "Add a new instrument").

10.17.2 Add an instrument

Use this to add a new instrument to your Instruments screen.
New instruments are always shown in the top left corner of the Instruments screen, so if you
want to locate a particular instrument in the top left corner, add this last of all so that you
don't need to reposition it.
The instrument must have been physically installed as part of your 8000i network, and must
send and receive data using NMEA or NavBus formats.
78
button shows the current setting. Select
– Sounder
Display
.
Setup
from the control panel.
+ Sounder
to display a list of sounder specification options.
button shows the current setting. Select
– Sounder
Display Instruments
then select
.
Config
from the control panel, then
New Panel
then enter the name for the new instrument panel using the
Northstar 8000i System - 12" Display Processor Installation Manual
.
.
. If you can't see the
Panel Config
OK.
Edit
, then
Edit
, then
Config
button, select
.