Table of Contents
Advertisement
7
Used ports and IP addresses
The Acronis OS Deploy Server and the Acronis Snap Deploy Management
Console use the following ports and IP addresses for remote operation:
port is obtained
port number is already in use, a random port is obtained
The Acronis PXE server uses following ports and IP addresses:
If you are using a firewall, you might have to set the appropriate access
options.
8
Technical support
Users that have legally purchased and registered their copy of Acronis Snap
Deploy will receive free e-mail technical support from Acronis. If you have
problems installing or using the system that you cannot resolve with the help
of this guide and readme file, please e-mail technical support. You will also
need to provide the registration number of your Acronis Snap Deploy
supplied with this package.
Support URL: http://www.acronis.com/support/
E-mail: support@acronis.com
6
UDP port: 9876
TCP port: 9876, if port number is already in use, a random
IPv4 multicast address: 239.255.219.45
IPv6 multicast address: FF05::fAA5:741E
Deploy Director Management Console UDP port: 9877, if
UDP port: 67, 68, 69.
Broadcast address: 255.255.255.255
Acronis Snap Deploy
Advertisement
Table of Contents
Need help?
Do you have a question about the SNAP DEPLOY and is the answer not in the manual?
Questions and answers