NOTE:
Boot from SAN is
Storage System Scripting Utility for EVA
The latest version of the Storage System Scripting Utility (SSSU) is available on the HP storage web site:
http://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html
From this web site, click Support & Drivers.
Important notes
Changing the ProLiant BIOS
If you have a ProLiant server with four or more HBAs, you must change the MPS Table Mode setting in the
BIOS; otherwise, your system may not detect all attached devices. To change the MPS Table Mode setting:
1.
Press F1 to access the ROM-Based Setup Utility (RBSU) during power-on self-test (POST).
This typically occurs after 5i Disk Array initialization.
2.
Select System Options > OS Selection > Linux.
3.
Select Advanced Options > MPS Table Mode.
4.
Select Auto Set Table.
5.
Press Esc twice, and then press F10 to save the configuration.
not
supported with a PCIe card.
4000/6000/8000 Enterprise Virtual Array connectivity 5.1C for Linux
7