Additional Kayenne Xl Menu Panels; Menu Panel Cooling - GRASS VALLEY KAYENNE XL PACKAGE 7.0.3 - INSTALLATION AND SERVICE MANUAL REV 8-2010 Installation And Service Manual

Additional Kayenne XL Menu Panels

Menu Panel Cooling

Kayenne XL Package — Installation and Service Manual
An additional touch screen Kayenne XL Menu Panel is available as an
option. An optional Menu Panel processor board is inserted into the PCU
for this added panel, and another multi-pin power and signal cable is used
for that panel.
It is also possible to run a Kayenne XL Touch Screen Menu Panel with a
standard PC, independent from the PCU. An optional power supply is
available to power the Menu Panel, and a DVI cable connects the PC to the
Menu Panel.
The Kayenne XL menu application can also be run on a standard PC, per-
mitting mouse and keyboard control from a laptop, or remote control from
any location on the network.
If a PC is used for Kayenne XL Menu operation, the PC's IP address must
be set to a compatible value to work with the rest of the Kayenne XL
system.
The Kayenne XL Touch Screen Menu Panel is externally powered and does
not have internal cooling fans. The unit is convection cooled throught per-
forations in the rear of the chassis. Mounting the panel in a free-standing
manner with the articulated Arm allows maximum air movement, and is
the preferred installation method. If an alternative method is used, ensure
that all vents are unobstructed and adequate airflow is available. Do not
install the Menu panel into an enclosed space.
CAUTION Do not install the Menu Panel into an enclosed space. Passive air movement
is required for cooling.
Touch Screen Menu Panel Installation
55