Figure 3-65 Configuring Spanning Tree - TP-Link TL-SG5426 Installation Manual

3
Configuring the Switch
Web – Click Spanning Tree, STA, Configuration. Modify the required attributes, and
click Apply.
CLI – This example enables Spanning Tree Protocol, sets the mode to RSTP, and
then configures the STA and RSTP parameters.
Console(config)#spanning-tree
Console(config)#spanning-tree mode rstp
Console(config)#spanning-tree priority 45056
Console(config)#spanning-tree hello-time 5
Console(config)#spanning-tree max-age 38
Console(config)#spanning-tree forward-time 20
Console(config)#spanning-tree pathcost method long
Console(config)#spanning-tree transmission-limit 4
Console(config)#
3-110

Figure 3-65 Configuring Spanning Tree

4-145
4-145
4-148
4-147
4-147
4-146
4-149
4-150