Before you start What’s in the box • The nominal impedance of this speaker system is 6 . Connect the speaker system to an amplifier with a load impedance ranging from 6 to 16 (a model with “6 – 16 ” displayed on the speaker output terminals). In order to prevent damage to the speaker system resulting Spikes (with attached nuts) x 4 from input overload, please observe the following precautions:...
The EX series, incorporating the abundant technological know-how behind Pioneer’s flagship TAD speaker series, was developed with the goal of creating the ultimate speaker possible in its price range. The design and production of the EX series result from an international effort that represents the finest in Pioneer’s speaker technology. Bass Drivers...
Installation and Placement How to install • Always use the spike bases as shown, with the indented Please observe the following points when installing speakers: surface facing up to receive the spike point. These speakers are bookshelf-type speakers. They will provide best performance when placed on a solid level surface away from the floor.