Dell 8 Installation Manual page 8

8 Verify that the processor is properly aligned and seated.
9 Close the processor shield. See Figure 1-5.
10 Rotate the socket-release lever down until it snaps into place.
See Figure 1-5.
Figure 1-5. Installing a Processor
1
1 socket-release lever
3 processor shield
11 Install the heat sink.
NOTE:
processor that consumes additional power. The new heat sink may not appear
different than the original one; however, it has improved thermal dissipation
specifications and must be used.
Using a clean lint-free cloth, remove the thermal grease from the heat
a
sink.
CAUTION:
Applying too much thermal grease can result in excess grease coming
in contact with and contaminating the processor socket.
8
Processor Installation
2
Your kit may contain a replacement heat sink if you are installing a
2 processor
3