Sanyo VCC-HD2100 - Full HD 1080p Network Camera Summary Manual page 4

Name and Function of Each Component
■
Side Face
NEAR
Operation Buttons
•
Restarting camera: Press the RESET button.
OPTION SETTINGS (CAMERA REBOOT)
•
Stopping recording/Removing SD memory card: Press the NEAR button for
2 seconds or more.
The power indicator starts blinking and then stays lit when the camera is ready for
you to remove the SD memory card.
SD MEMORY CARD
•
Resuming stopped recording/Having camera recognize SD memory card:
Press the FAR button for 2 seconds or more.
The power indicator starts blinking and then stays lit when the camera has
recognized the SD memory card.
•
Restoring factory default settings: Press the NEAR and SET buttons
simultaneously.
OPTION SETTINGS (FACTORY DEFULT)
•
Resetting login password (for default users only): Press the FAR and SET
buttons simultaneously.
•
Restoring factory default back focus position: Press the NEAR and FAR
buttons simultaneously.
CAMERA SETTING (FOCUS ASSIST)
•
Adjusting focus/Adjusting iris
Page 7, "Lens Adjustment" section or the CAMERA SETTINGS (FOCUS
ASSIST/IRIS SETTING) section on the electronic manual.
•
Viewing Firmware Version:
"Viewing Firmware Version" section or the OPTION SETTINGS (FIRMWARE
UPDATE) section on the electronic manual.
FAR
RESET
SET
3
SD memory card: SD card