Streaming Page - JVC VN-E4U - 4 Channel Network Encoder Instructions Manual

Settings
(continued)

5-9 Streaming Page

This page is for setting manual multicast transmission. Transmission is allowed up to 10 streams.
This page can be used upon access via AadminB or AoperatorB.
A Control
B Destination Address
C Destination Port
D Data
E Frame Rate
F View Window
32
D
A
For starting or stopping streaming. Parameters that are set on the AStreamingB page will be
saved when transmission is started upon pressing the AStartB button.
For specifying the destination address. Specify the multicast address. In addition, set all 10
streams to different multicast addresses.
For specifying the destination port number. It is recommended that different port numbers be
specified for all 10 streams. Multiple multicast streams cannot be received on 1 PC when there
are duplicate port numbers.
For specifying the data to be sent.
For specifying the frame rate when sending JPEG data. The actual frame rate is limited by the
frame rate set on the AEncodingB page.
Current image of selected ADataB can be shown.
E
B C F