Table of Contents
Advertisement
Quick Links
V.NETWORKS
VN-C3WU
INSTRUCTIONS
Thank you for purchasing the JVC VN-C3WU.
To gain maximum benefit from this product, read this
instruction manual carefully before use and retain it for future
reference.
The serial number is very important for maintaining quality of
your product. At the time of purchase, check to see that the
serial number is correctly printed on the top of the unit and
that the serial numbers on the unit and warranty match.
This instruction manual is printed on
recycled paper.
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear of the
cabinet. Retain this information for future
reference.
Model No.
Serial No.
SS961552-001
Advertisement
Table of Contents
Related Manuals for JVC VN-C3WU - Digital Web Color Camera
Summary of Contents for JVC VN-C3WU - Digital Web Color Camera
- Page 1 VN-C3WU This instruction manual is printed on INSTRUCTIONS recycled paper. Thank you for purchasing the JVC VN-C3WU. For Customer Use: To gain maximum benefit from this product, read this Enter below the Model No. and Serial instruction manual carefully before use and retain it for future No.
-
Page 2: Safety Precautions
This device complies with part 15 of the FCC Cet appareil numérique de la Rules. Changes or modifications not approved by Class A est conforme à la JVC could void the user’s authority to operate the norme NMB-003 du Canada. equipment. - Page 3 WARNING Keep away from moisture Fire or electrical shock can result from the presence of mois- ture. Spillage can occur from objects containing water (flower vases, flower pots, cups, cosmetics, pharmaceuticals, etc.) and should not be placed on top of this device. Do not touch Do not touch lines (antenna wires, phone lines, etc.) con- nected to this device or power plugs during a thunder storm...
- Page 4 PRECAUTIONS FOR SAFE AND PROPER USE To ensure safety Always observe the following to ensure correct and safe usage of this device. Read Safety Precautions thoroughly before using this device. The safety precautions contain important information and should always be observed. After reading, store in a readily available location for future reference.
- Page 5 Cautions Do not install this device in locations such as the following. To avoid the possibility of fire or electrical shock, do not install this device in locations such as the following. • Where there is excessive humidity or dust. Do not install where there is excessive humidity or dust.
- Page 6 Cautions • This instruction manual may not be reproduced in part or in its entirety. • Use caution to avoid infringing the copyrights of others during use. • Please note that this company does not assume any responsibility in the case of any possible errors that may be found in this instruction manual.
-
Page 7: Table Of Contents
Contents Safety Precautions ..................2 Package Contents ..................8 Operating Environment ................9 VN-C3WU Installation and Setup ............... 11 Before starting installation and setup ............ 11 Names of VN-C3WU parts ..............11 Installation and setup ................12 Alarm IN/OUT connection ................14 Setting the VN-C3WU IP address ............. -
Page 8: Package Contents
Package Contents This product includes all of the following items. If any item should be missing, please contact your local dealer. VN-C3WU main unit Instruction manual (this document) -
Page 9: Operating Environment
Operating Environment The environment described below is necessary for operation of the VN-C3WU. A personal computer running the following WWW browser software: WWW browser software that is compatible with JavaScript or Frame. Netscape 4.0 or higher, or Internet Explorer 4.0 or higher, is required. CPU performance and memory capacity should be the recommended values for the WWW browser software used. -
Page 10: To Ensure Correct Usage
To ensure correct usage When installing, avoid the following. • Locations subject to rain and water. • Locations where the ambient temperature exceeds the range of 0 - 40 (recommended) degrees C. • Locations with vibration. • Locations with excessive dust, oil or gas. When this product is used with AGC on (Auto on), the sensitivity will be increased automatically in dark places, so the screen may flicker in some cases. -
Page 11: Vn-C3Wu Installation And Setup
VN-C3WU Installation and Setup Before starting installation and setup It is necessary to set an IP address for each VN-C3WU unit. Use the following procedure for the setup of individual units. (If the power is not turned on, the installation operation can be performed at one time.) 1. -
Page 12: Installation And Setup
Installation and setup 1. Installation Use the optional bracket (Model VN-BK30) for installation. Make the power and network connections after completion of the installa- tion work. Caution Install in a location with sufficient strength to prevent falling. VN-C3WU units can be installed as shown in the diagram below. 1 Attach the ceiling fixer with the 2 Mount the camera body fixer hole... - Page 13 2. Connecting to a network Turn on the power of only one VN-C3WU unit. When network connection is completed and the power is turned on, the VN-C3WU unit will be connected to the network at the following IP ad- dress. Factory set (Default) IP address 192.
-
Page 14: Alarm In/Out Connection
3. Alarm IN/OUT connection Connect external devices to the alarm IN/OUT as shown below. Sensor insert button External External External device device device OUT 1 OUT 2 Cable connection and disconnection Press the sensor insert button when connecting and disconnecting cables. After connecting or disconnecting, make sure the sensor insert button returns to its original position. -
Page 15: Setting The Vn-C3Wu Ip Address
4. Setting the VN-C3WU IP address Changing the IP address of the PC Display the network settings panel by selecting Settings from the Start button, then selecting Control Panel and Network, in that order. 1 Select the TCP/IP item, then click on Properties. - Page 16 About the web pages mentioned in this instruction manual From the following page, all the screens expressed as VN-C3WU pgae are contained in VN- C3WU and displayed by the web page browse and display function of the WWW browser software. Therefore depending on WWW browser software and its settings, the formats and fonts may be different from the screens of VN-C3WU page, in this manual.
-
Page 17: Changing Internal Settings
4-2 Changing internal settings Start the WWW browser software. Specify the factory-set VN-C3WU web page address in the browse location in the WWW browser software. (When the factory-set IP address is specified, the WWW browser software will display the VN-C3WU top page.) http://192.168.0.2/ Caution Caution... - Page 18 Display of the VN-C3WU top page. VN-C3WU top page. Click on Settings. The Settings page is displayed. VN-C3WU Settings page.
- Page 19 Setup is performed by changing the "Other Settings" contents. VN-C3WU Settings page "Other settings" Other Settings [IP address] Change to an IP address assigned or approved by the network administrator. [Subnet mask] Like the IP address, the subnet mask is assigned or approved by the network administrator. [Default Gateway] Set the default Gateway IP address.
- Page 20 Other Settings [Program version] The version of the VN-C3WU main unit firmware. Cannot be changed. [Power Frequency] This setting reduces the amount of flicker under fluorescent lighting. Set to 50Hz or 60Hz in accordance with the power frequency at the installation location. [Password] Specify using up to 8 letters.
- Page 21 VN-C3WU Settings page "Other Settings" Press Apply button to enable the setting. Check the new IP address again. If there is no mistake in the entry, click on OK. Caution The confirmation screen shown above will appear when the IP address, subnet mask, host name and power frequency settings are changed.
-
Page 22: Restore To The Orlginal Pc Ip Address
4-3 Restore to the original PC IP address Using the same procedure as described in item 4-1, select Settings from the Start button, then select Control Panel and Network, in that order. Next, restore to the original IP address and reboot the PC in accordance with the messages. 5. - Page 23 Enter the User Name and Password. Enter a password. It is not necessary to enter a user name. Click on OK. In order to assure quick display of the VN-C3WU web page from the WWW browser being used, register a browse location (URL : Uniform Resource Locator) is recommended. Use Bookmarks with Netscape or Favovites with Internet Explorer for this registration.
-
Page 24: Vn-C3Wu/Web Page
VN-C3WU/Web page Explanation of display items and operations The following is a diagram of the configuration of the VN- C3WU internal URL (web pages). Caution In order to access all the VN-C3WU web pages, the Administrator level password is required. Password level USER OPERATOR... -
Page 25: Still Image Page
Still image page: http:// ***** still_e.html. ( ***** is the URL of the VN-C3WU) This page is to display a still image when browsing is started. To update the image, use the Reload or Refresh function of the WWW browser software. To save the image being displayed, use the Save as... -
Page 26: Control Page
Control page: The URL will be changed automatically by the WWW browser software. Netscape http:// ***** /spushcontrol_e.html Internet Explorer http:// ***** /javacontrol_e.html. ( ***** is the URL of the VN-C3WU) This page is to control Pan/Tilt operations and to operate the position memory. The images are updated automatically and displayed as live images. -
Page 27: Control Window
Control Window When the Control Page is opened, the sub-window shown below will be displayed for setting pan, tilt, zoom, position memory shift and position memory. Caution Always perform Pan/Tilt operations after all button images have been read by the browser. - Page 28 Pan/Tilt/Zoom control The current Pan/Tilt angle step and Zoom step are displayed here. Angles (integer value) can be changed by entering value and clicking on the Apply button. The lens zoom ratio can be changecd by using the two operation buttons. The amount of change each time one of the zoom...
- Page 29 Lens setting window Zoom Operates the zoom. Zoom-in and zoom-out are performed by changing the value and clicking on the Apply button. Focus Adjusts the focus. When set to Auto (auto-focus), focus will be adjusted automatically. When set to Manual, focus will be manually adjusted. (The focus position can be set by changing the value on the right and clicking on the Apply button.) Iris...
-
Page 30: Position Memory Setting
Position memory movement The VN-C3WU is equipped with 10 position memories. VN-C2WU control page (position memory control) VN-C2WU control page (position memory control) VN-C3WU control page (position memory control) Position memory setting The contents of the currently set position memory are displayed. -
Page 31: Setting Page
Settings Page: The URL will be changed automatically by the WWW browser software. Netscape http:// ***** /spushconfig_e.html Internet Explorer http:// ***** /javaconfig_e.html. ( ***** is the URL of the VN-C3WU) This page is to make the camera image related settings and connection (setup) related settings. (The images are updated automatically and displayed as live images.) VN-C3WU settings page Hyper link to other pages... - Page 32 Control Window Refer to the Control Page explanation. Image Quality Settings Window Camera auto/ manual setting. Image quality related menu...
-
Page 33: Image Quality Setting
Camera Auto/Manual Settings VN-C3WU settings page (Auto/manual settings) Manual : “Quality” in “Image Quality Setting” such as Saturation and Color Balance can be manually set. Auto : “Quality” in “Image Quality Setting” can be automatically set. Select Auto or Manual depending on operational environment. - Page 34 Image Quality menu [Resolution] Three different image sizes are available: 640 x 480, 320 x 240 and 160 x 120. [Compression Rate] The compression ratio has an inversely proportional relationship to image quality but increasing the compression ratio increases the number of frames that can be displayed per second.
- Page 35 Item Effect Adjustment of the color saturation. Saturation Also effective when Auto is set. (The larger the setting value, the greater the color saturation.) Move the slide Adjustment of the tone. Color Balance Also effective when Auto is set. (50 is the median value. Decreasing the settingvalue emphasizes red and increasing the settingvalue emphasizes blue.) Brightness...
- Page 36 Alarm Settings Window Sets the VN-C3WU operation when an alarm signal is input. Alarm 1/2 Input On/Off ------------- Set to On when the alarm input jack (alarm 1/2) is to be used; set to Off when the alarm jack not to be used. Setting ------------- The position memory shift and alarm output to the position memory can be set when an alarm is input.
- Page 37 Relay Alarm Input The input of an alarm a few seconds after a previous alarm has been input can be set separately as a relay alarm. Alarm Out On/Off ------------- Set to On when alarm output is to be used; set to Off when alarm output is not to be used.
-
Page 38: How To Link The Vn-C3Wu Images
How to link the VN-C3WU images The still or live mages of VN-C3WU can be pasted and displayed in a separate web page you have created. Displaying still image: A still image can be displayed by creating a web page with the contents described below. - Page 39 Displaying with Java Live images can be displayed with Java-compatible WWW browser software (Internet Explorer, etc.) by creating a web page with the contents described below. <APPLET CODE="mjpeg.class"WIDTH=640 HEIGHT=480 CodeBase=http:// ***** /"></APPLET> ***** indicates the VU-C3WU IP address. Caution The resolution, compression rate, etc., of both the still and live images browsed and displayed (in a separate web page are) in accordance with the previously set setting values.
-
Page 40: Troubleshooting
Troubleshooting The IP address to which Unknown IP addresses are handled as the VN-C3WU was repairs. Please consult your local dealer. changed has been forgotten. The password protection Disabling of the password protection function was set but the password is handled as a repair. Please consult your was forgotten. - Page 41 Color balance is • Try changing the Camera Auto/Manual unsatisfactory. setting in the VN-C3WU Settings Page from Auto to Manual, and then back to Auto again. When changing between scenes with different light sources (for example, when moving from outdoors with sunlight to indoors with fluorescent lighting), there may be a slight delay before the automatic tracking white balance function starts to...
-
Page 42: Specifications
Specifications LAN standard IEEE 802.3 Communication protocol TCP/IP, HTTP Video element 1/3-inch, 300,000-pixel CMOS image sensor. Minimum focusing distance 1.0m Pan/tilt operation angle Pan: 320° Tilt: 90° Output image format 480, 320 240, 160 120 Power supply voltage DC 12V Power consumption 2.0A (max.) Operating temperature... - Page 44 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan SS961552-001 COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.