Livepage Functions - Bosch NBC-225-P Installation And Operation Manual

IP Camera 200 Series
6.3.2

LIVEPAGE Functions

In this window, adapt the Livepage functions to meet your
requirements. Choose from a variety of different options for
displaying information and controls.
1.
2.
Transmit audio
When selected, the audio from the camera (if on) is sent to the
computer.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons
along with their assigned names. If an alarm is active, the
corresponding icon changes color.
Show relay outputs
The relay output is shown next to the video image as an icon
along with its assigned name. If a relay is switched, the icon
changes color.
Show VCA metadata
When video content analysis (VCA) is activated, additional
information is displayed in the live video stream. For example,
in Motion+ mode, the sensor areas for motion detection are
marked.
Show event log
The event messages are displayed with the date and time in a
field next to the video image.
Show system log
The system messages are displayed with the date and time in a
field next to the video image and provide information about the
establishment and termination of connections, etc.
Bosch Security Systems
Mark the check boxes for the functions to be displayed on
the Livepage. The selected elements are checked.
Check the Livepage to see how the desired items are
available.
Installation and Operation Manual
Advanced Mode | en
AR18-09-B003 | v1.1 | 2010.05
37