Portjoin; Portleav; Brgparam - Alcatel OmniSwitch 6624 Troubleshooting Manual

Generic Troubleshooting in Dshell

PORTJOIN

This event is sent by Link Aggregation NI when a physical port is joining an aggregator; It could be either
a static aggregator (OmniChannel) or a dynamic aggregator (802.3ad). This message is generated after the
first port has joined the aggregator (see
The parameters are:
First parameter: The aggregator identifier (logical port ID value between 0 and 31).
•
Second parameter: The global port identifier of the physical port that has joined the aggregator.
•

PORTLEAV

This event is sent by Link Aggregation NI when a physical port is leaving an aggregator; It could be either
a static aggregator (OmniChannel) or a dynamic aggregator (802.3ad). This message is generated after the
first port has joined the aggregator (see
gator identifier, the global port identifier of the port which is leaving it and the global port identifier of the
newly primary port
The parameters are:
First parameter: The aggregator identifier (logical port ID value between 0 and 31).
•
Second parameter: The global port identifier of the physical port that has joined the aggregator.
•
Third parameter: The global port identifier of the physical port that will have the primary port role.
•
Fourth parameter: The output QID of the newly primary port (not significant; see note of
•
on page 4-13).

BRGPARAM

The is event is generated by the Spanning Tree CMM when a configuration parameter of the Spanning
Tree is changed by the operator. This message is sent to all the NI that are up and running.
The parameters are:
First parameter: The spanning identifier (i.e., VLAN identifier).
•
Second parameter: The type of the parameter. A 1 indicates Spanning Protocol (802.1w(third parame-
•
ter=4)/802.1D(third parameter=3)), a 2 indicates Spanning Tree (Flat (third parameter=1)/ or 1x1 (third
parameter=2)/), a 3 indicates the bridge priority value, a 4 indicates the Hello timer value, and a 5 indi-
cates the forward delay value, and a 6 indicates the maximum age.
Third parameter: The value of the parameter.
•
page 4-14
"AGGR_UP" on page 4-13).
"AGGR_UP" on page 4-13). Link aggregation provides the aggre-
OmniSwitch Troubleshooting Guide
Troubleshooting Spanning Tree
"AGGR_UP"
September 2005