The following table describes the Uplink Failure Detection (UFD) statistics:
Table 73
Uplink Failure Detection statistics
Statistic
Number of times LtM link failure
Number of times LtM link in Blocking
State
Number of times LtD got auto
disabled
Statistics dump
The following command dumps GbE2c statistics:
show counters
Use the dump command to dump all switch statistics available (40K or more, depending on your configuration). This
data can be used to tune or debug switch performance.
If you want to capture dump data to a file, set your communication software on your workstation to capture session
data prior to issuing the dump commands.
Description
The total numbers of times that link failures were detected on the
uplink ports in the Link to Monitor group.
The total number of times that Spanning Tree Blocking state was
detected on the uplink ports in the Link to Monitor group.
The total numbers of times that downlink ports in the Link to Disable
group were automatically disabled because of a failure in the Link
to Monitor group.
Statistics commands 80