Grease Filters; Stainless Steel Surfaces - GE CV936MSS Owner's Manual And Installation Instructions

Care and cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the
vent hood.
Reusable Metal Grease Filters
The hood has 2 metal reusable

grease filters.

The metal filters trap grease
released by foods on the cooktop.
They also help prevent flaming
foods on the cooktop from
damaging the inside of the hood.
For this reason, the filters must
ALWAYS be in place when the
hood is used. The grease filters
should be cleaned once a month,
or as needed.
To clean the grease filters , soak
them and then swish them around
in hot water and detergent.
Don't use ammonia or ammonia
products because they will darken
the metal. Do not use abrasives or
oven cleaners. Light brushing can
be used to remove embedded dirt.
Rinse, shake and let them dry
before replacing.

Stainless Steel Surfaces

Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel
surface, use warm sudsy water or
a stainless steel cleaner or polish.
Always wipe the surface in the
direction of the grain. Follow the
cleaner instructions for cleaning
the stainless steel surface.
GEAppliances.com
To remove:
Grasp the filter handle and pull it
up, forward and out.
To replace:
Hold the filter at the bottom
with the handle.
Place the top end of the filter
against the inside front of the
hood.
Slide it up until it stops and
push the bottom end back
until it snaps into place.
To inquire about purchasing
stainless steel appliance cleaner or
polish, or to find the location of a
dealer nearest you, please call our
toll-free number:
National Parts Center
800.626.2002
GEAppliances.com
5