1. Manuals
  2. Brands
  3. HAUL MASTER Manuals
  4. Accessories
  5. 34313
  6. Assembly and operating instructions manual

HAUL MASTER 34313 Assembly And Operating Instructions Manual

Excess cargo carrier
Hide thumbs Also See for 34313:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

EXCESS CARGO CARRIER
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE ThIS MANUAL.
Copyright
1997 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09k
34313
. All rights reserved. No portion of this manual or any artwork
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 34313 and is the answer not in the manual?

Questions and answers

Related Manuals for HAUL MASTER 34313

Summary of Contents for HAUL MASTER 34313

  • Page 1 EXCESS CARGO CARRIER 34313 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE ThIS MANUAL. Copyright 1997 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork ©...

  • Page 2: Specifications

    Wear restrictive hair covering to contain long hair. 8. USE EYE AND EAR PROTECTION. Always wear ANSI approved chemical splash goggles when working with chemicals. Always wear ANSI approved impact safety goggles at other Page 2 -- SKU: 34313...
  • Page 3 20. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. Page 3 -- SKU: 34313 REV 02i...
  • Page 4 Step 3: Insert the RECEIVER MOUNTING BAR (#A) under the mesh screen of the BED FRAME (#D) and between the arched Bed Frame Supports as shown in Figure 1. Figure 1 — Attatching the Mounting Receiver Bar Page 4 -- SKU: 34313 REV 02i REV 02j...
  • Page 5 Step 5: Attach a NUT (#F) to each of the HEX BOLTS and tighten. Detachable Side Rails The following Steps show how to assemble the DETACHABLE SIDE RAILS (#B). These side rails should always be in place when using the Excess Cargo Carrier. Page 5 -- SKU: 34313 REV 02i...
  • Page 6 Step 2: Place a SIDE RAIL BRACE (#C1) outside on the vertical folded edges of the DETACH- ABLE SIDE RAIL and BED FRAME as shown in Figure 4. Figure 4 — Attaching Center Side Rail Braces Page 6 -- SKU: 34313...
  • Page 7 Step 5: Repeat Step 4 for the other corner of the Carrier Assembly. Step 6: Repeat Steps 1 through 5 to assemble the second DETACHABLE SIDE RAIL. Your Excess Cargo Carrier is ready for use. Page 7 -- SKU: 34313 REV 02i...

  • Page 8: Operation

    (Class 3 Hitch = 500 Lbs. maximum tongue weight) PARTS LIST Item# Description Item# Description Receiver Mounting Bar Hex Bolt M10 Detachable Side Rail Nut M10 Side Rail Brace Hex Bolt M6 Side Rail Brace Nut M6 Bed Frame Page 8 -- SKU: 34313 REV 02i...

  • Page 9: Assembly Diagram

    BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACMENT PARTS THERETO. Page 9 -- SKU: 34313...

This manual is also suitable for:

Excess cargo carrier

Table of Contents