Installation - ESET SMART SECURITY 4 - QUICK START GUIDE FOR MICROSOFT WINDOWS 7-VISTA-XP-2000-2003-2008 Quick Start Manual

Installation

Before commencing installation,
please close all running programs.
Since ESET Smart Security contains
an antivirus and firewall components,
we strongly recommend that you
remove any other antivirus prog rams
or firewall you might have installed
on your computer to prevent mutual
conflicts. You do not need to disable
or remove the Windows firewall
in Windows XP or Vista, as this is
automatically handled by the ESET
Smart Security installer. You can
install ESET Smart Security from an
installation CD or from a file that you
download from the ESET website.
Launching the installation
To launch the installer wizard, either
do one of the following:
• If you install from the installation
CD, insert the CD into the CD-ROM
drive and the installation should
automatically begin.
• If you install from a downloaded file
double-click the file you downloaded
to launch the installer.
After launching the installer and
accepting the license agreement,
the installer will offer two types of
installation.
Typical – only the most important
parameters will be configured during
installation. Other parameters will be
pre-set to their recommended settings.
This mode provides our recommended
comprehensive protection and is
suitable for most users.
Custom – enables configuration
of all advanced parameters during
installation.
This guide describes typical installation.