Quick Start; Starting And Logging In; Editing Authentication Options - Kyocera FS-1035MFP/DP User Manual

Starting and Logging In

1
2
3
4

Editing Authentication Options

1
2
KMnet Viewer 5.3

1 Quick Start

Many features are available to help you organize and monitor network device
information.
These features are available for starting the application, discovering devices,
and getting familiar with the user interface.
Open the application.
If you have administrator rights, your last saved workspace appears and you
can proceed with your tasks. If you have administrator rights, and you are
starting the application for the first time, proceed to step 4.
If you do not have administrator rights, the network administrator must set up a
user login password for you. If no password has been set up, the application
does not start, and an access error message appears.
Type your password in the login text box, and click OK. A password is a
maximum of 32 characters. A blank password is allowed.
If your submitted password is accepted, your last saved workspace appears,
unless it is your first time starting the application. If it is the first time, proceed to
step 4.
If the password is not correct, the application displays an error message. If you
incorrectly enter the password three times, an error message appears, and the
application does not start. If this happens, see the network administrator about
your password.
If you just installed the application, and it is the first time you are starting it, a
dialog box appears after you have started and successfully logged in. You are
asked to specify a workspace file. After you specify your workspace file, the
application opens and displays the Add Devices wizard to help you search for
network devices and create the device list.
If a user does not have administrator rights on the computer with the application
installed, the administrator can set up a user login password. If no password
has been set up for a user without administrator rights, the application does not
start, and an access error message appears.
In the menu bar at the top left of the screen, click Edit > Options. In the
Options dialog box, click Authentication.
Select Enable local password.
1-1