Denon AVR-1908 Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo Receiver
  5. AVR-1908
  6. Owner's manual

Denon AVR-1908 Owner's Manual

Denon owner's manual av surround receiver avr-1908
Hide thumbs Also See for AVR-1908:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
AV SURROUND RECEIVER
AVR-1908
Owner's Manual
Manuel de l'Utilisateur

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVR-1908 and is the answer not in the manual?

Questions and answers

PETER MICHELS
February 21, 2025

How do I connect my TV via the optical output

0
1 comments:
Mr. Anderson
February 21, 2025

To connect a Denon AVR-1908 to a TV using the optical output, follow these steps:

1. Locate the Optical Output on the TV – Find the TV’s digital optical audio output port (TOSLINK).

2. Find the Optical Input on the AVR-1908 – Locate the optical audio input on the receiver.

3. Connect with an Optical Cable – Use a digital optical (TOSLINK) cable to connect the TV’s optical output to the AVR-1908’s optical input.

4. Select the Correct Input on the AVR-1908 – Use the receiver’s input selector to choose the corresponding optical input.

5. Adjust TV Audio Settings – In the TV’s audio settings, set the sound output to "Optical" or "Digital Audio Out" and ensure it is set to PCM if necessary.

This setup will allow the TV’s audio to play through the AVR-1908.

This answer is automatically generated

0

Related Manuals for Denon AVR-1908

Summary of Contents for Denon AVR-1908

  • Page 1 AV SURROUND RECEIVER AVR-1908 Owner’s Manual Manuel de l’Utilisateur...

  • Page 2: Safety Instructions

    ENGLISH FRANCAIS SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 4: Table Of Contents

    ENGLISH Contents Getting Started Accessories ······················································································2 Cautions on Handling ·····································································3 Cautions on Installation ·································································3 About the Remote Control Unit ····················································3 Inserting the Batteries ····································································3 Operating Range of the Remote Control Unit ································3 Part Names and Functions ·····························································4 Front Panel ·····················································································4 Display ···························································································4 Rear Panel ······················································································5 Remote Control Unit ······································································6...

  • Page 5: Getting Started

    Specifications ··············································································· 68 List of preset codes ··········································· End of this manual Getting Started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.

  • Page 6: Cautions On Handling

    Note Wall About the Remote Control Unit In addition to the AVR-1908, the included main remote control unit (RC-1077) can also be used to operate the equipment listed below. q DENON system components w Non-DENON system components •...

  • Page 7: Part Names And Functions

    Part Names and Functions For buttons not explained here, see the page indicated in parentheses ( ). Front Panel W5 W6 W7 W8 W9 SELECT/ENTER knob ································· (18) Power operation button (ON/STANDBY) ··········································· (41) Power indicator ··········································· (41) • The SELECT/ENTER knob on the main unit operates Power switch (hON jOFF) ·····················...

  • Page 8: Rear Panel

    ENGLISH Rear Panel Digital audio connectors (OPTICAL / COAXIAL) ·························· (12, 13) Analog audio connectors (AUDIO) ············ (12) EXT. IN connectors ····································· (15) REMOTE CONTROL jacks··························· (17) PRE OUT connector ······································ (9) ZONE2 connectors······································ (17) AC OUTLETS ··············································· (17) VIDEO / S-VIDEO connectors ···················· (12) Power cord ··················································...

  • Page 9: Remote Control Unit

    Remote Control Unit n Main Remote Control Unit (RC-1077) [ Front ] Indicator ······················································ (48) Power buttons············································· (41) Tuner system buttons ································ (42) Source select buttons ································ (41) System buttons ·········································· (45) Video select button (V. SELECT) ··············· (33) Cursor buttons (uio p) ························· (18) DISPLAY button ··········································...

  • Page 10: Connections

    Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVR-1908. For details, refer to the instructions for the respective connection items below. NOTE •...

  • Page 11: Video Conversion Function

    • When viewing component video signals via the AVR-1908, the on-screen display appears when the MENU button or the main remote control unit’s DISPLAY button is operated. • When only component video signals are input to the AVR-1908, the characters of the on-screen display are not displayed over the picture.

  • Page 12: Speaker Connections

    When using just one surround back speaker, connect it to the left channel (SBL). NOTE By default, the AVR-1908’s “Amp Assign” setting is set to “ZONE2” . To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 28).
  • Page 13 If the protection circuit is activated again even though there are no problems in the ventilation around the set nor in the connections, the set may be damaged. Turn the power off, then contact a DENON service center. ENGLISH...

  • Page 14: Connecting Equipment With Hdmi Connectors

    16/20/24 bits DVD-Video • When the AVR-1908 and DVD player are connected using an HDMI cable, also connect the AVR-1908 and monitor using an HDMI cable. • If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.

  • Page 15: Connecting The Monitor

    Connecting the Monitor • Connect the cables to be used (vpage 8 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable. • To output the audio signals to the monitor with HDMI connections, set menu “Manual Setup” – “HDMI Setup”...

  • Page 16: Cd Player

    (vpage 33). iPod ® Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVR-1908. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions. iPod •...

  • Page 17: Connecting The Recording Components

    Connect the cables to be used. Video cassette recorder • When recording via the AVR-1908, the playback device’s cable must be of the same type as the cable used to connect the AVR-1908’s VCR OUT connector. Example: TV IN → S-Video cable : VCR OUT → S-Video cable TV IN →...

  • Page 18: Connections To Other Devices

    “Input Setup” – “Input Mode” – “EXT. IN” (vpage 32). • The video signal can be connected in the same way as a DVD player (vpage 12). • To play copyright-protected discs, connect the AVR-1908’s EXT. IN connector with the DVD player’s analog multi-channel output connector.

  • Page 19: Xm Connector

    XM connector ® • The AVR-1908 is an XM Ready receiver. You can receive XM Satellite Radio by connecting to the XM Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel.

  • Page 20: Multi-Zone

    ENGLISH Multi-zone ZONE2 out Connections If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to play a different program source in ZONE2 at the same time (vpage 52 ~ 55). Pre-main amplifier (ZONE2) Input Output Infrared Infrared retransmitter...

  • Page 21: Menu Operations

    Button name only: Buttons on the main unit and remote control unit Menu Operations With the AVR-1908, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. Operations The same operation is possible on the main unit or remote control unit.

  • Page 22: Examples Of On-Screen Display And Front Display

    ENGLISH Examples of On-screen Display and Front Display Some typical examples are described below. GFront displayH A u t o S e t u p S t a r t • D i g i t a l : • O P T 1 – Press op to change the setting M e t e r •...

  • Page 23: Menu Map

    Menu Map MENU 1.Auto Setup 2.Manual Setup 3.Input Setup 4.Parameter 5.Information Information Parameter (vpage 39, 40) (vpage 36 ~ 39) n Status n Surround Parameter • Main Zone • MODE • ZONE2 • CINEMA EQ n Audio Input Signal • D.COMP n HDMI Information •...

  • Page 24: Auto Setup

    ENGLISH Auto Setup • Audyssey MultEQ ® automatically measures the acoustical problems in the listening environment to create the best audio experience for your home theater. • It optimizes a large listening area where one or more listeners are seated. Measurements are performed by placing the calibrated microphone (DM-A405) successively at multiple positions throughout the listening area as shown in Example q.

  • Page 25: Auto Setup

    (subwoofers, etc.). This is because fi lters add electrical delay to the signal that should be compensated. Step 5 : Store The auto setup measurement results are stored in the AVR-1908. NOTE Do not turn the power off while the settings are being stored.

  • Page 26: Error Messages

    ENGLISH Error Messages If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again.

  • Page 27: Manual Setup

    None 2spkrs 1spkr NOTE By default, the AVR-1908’s “Amp Assign” setting is set to “ZONE2” . To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 28). Large : Select this when using large speakers with ample low frequency reproduction capabilities.

  • Page 28: Channel Level

    ENGLISH Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0.0ft ~ 60.0ft : Display when “Feet” is set. 0.00m ~ 18.00m : Display when “Meters” is set. NOTE Set the distance between the listening position and the various speakers to no more than 20.0 ft (6.00 meters).

  • Page 29: Audio Setup

    Audio Setup Make settings for audio playback. F Menu screen F 2.Manual Setup 2-3.Audio Setup 1.Speaker Setup 2.HDMI Setup 1.EXT.IN SW Level 3.Audio Setup 2.2ch Direct/Stereo 4.Zone2 Setup 3.Dolby Digital Setup 5.Option Setup 4.Auto Surround Mode 5.Manual EQ a EXT. IN Subwoofer Level Set the subwoofer level for playback.

  • Page 30: Dolby Digital Setup

    ENGLISH d Dolby Digital Setup Set dynamic range for downmix playback of Dolby Digital sources. [Selectable items] : Compression is used. Select this if sound from front speakers is distorted. : Do not use compression. This is the recommended setting. •...

  • Page 31: Zone2 Setup

    Zone2 Setup Make settings for audio playback in a ZONE2 system. F Menu screen F 2.Manual Setup 2-4.Zone2 Setup 1.Speaker Setup 2.HDMI Setup Level Lch 3.Audio Setup 4.Zone2 Setup Vol.Limit : OFF 5.Option Setup Power On Lev.: Last Mute Lev. : Full a Lch Level Adjust the left channel output level.

  • Page 32: Volume Control

    ENGLISH s Volume Control Set the main zone volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] : Do not set a maximum volume. –20dB : Set the maximum volume to –20 dB. –10dB : Set the maximum volume to –10 dB. : Set the maximum volume to 0 dB.

  • Page 33: Control Unit

    Remote ID Setup Set remote control ID. [Selectable items] NOTE When using the AVR-1908 with only the included remote control unit (RC-1077), there is no need to make settings. j Display Adjust display brightness of the receiver. [Selectable items] Bright : Normal display brightness.

  • Page 34: Input Setup

    ENGLISH Input Setup Use this procedure to select the input source and make the settings related to playing input sources. n TUNER (AM/FM) This menu is for “TUNER” . F Menu screen F 3.Input Setup TUNER 1.Auto Preset 2.Preset Skip 3.Preset Name 4.Input Mode 5.Rename...

  • Page 35: Input Mode

    “Input Mode” to “AUTO” . • When the AVR-1908 and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor.

  • Page 36: Ipod

    ENGLISH Digital In Select digital input connector to assign to this source. [Input source] CD AUX CDR DVD/HDP TV/CBL V.AUX [Selectable items] COAX1 : Assign COAXIAL 1 input connector. COAX2 : Assign COAXIAL 2 input connector. OPT1 : Assign OPTICAL 1 input connector. OPT2 : Assign OPTICAL 2 input connector.

  • Page 37: Antenna Aiming

    MULTI CH IN 7 .1 z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1” and the AVR-1908’s “AFDM” setting is set to “ON” . z2 : This is displayed when the input signal is “DTS-ES Discrete 6.1”...

  • Page 38: Dsp Simulation Playback

    ENGLISH DSP Simulation Playback The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes. The surround parameters can be adjusted (vpage 59, 60) to achieve an even more realistic, powerful sound field.

  • Page 39: Parameter

    Parameter F Menu screen F 4.Parameter 1.Surround Parameter 2.Tone Control 3.Room EQ 4.RESTORER 5.Night Mode 6.Audio Delay a Surround Parameter Adjust surround sound parameters. The adjustable parameters differ for the different surround modes (vpage 59, 60). MODE Select the mode according to the playback source. n In the PLgx or PLg mode [Selectable items] CINEMA MUSIC GAME z: Can be selected in the PLg mode.
  • Page 40 ENGLISH ROOM SIZE Determine size of acoustic environment. [Selectable items] small : Simulate acoustics of a small room. med. s medium med. l large : Simulate acoustics of a large room. NOTE “ROOM SIZE” does not indicate the size of the room in which sources are played.

  • Page 41: Tone Control

    s Tone Control Adjust the tonal quality of the sound. Tone Defeat Turn tone adjustments off. [Selectable items] : Playback without tone adjustment. : Allow tone adjustment (treble, bass). The tone cannot be adjusted when in the DIRECT mode. Bass Adjust low frequency range (bass).

  • Page 42: Night Mode

    ENGLISH g Night Mode Optimized setting for late-night listening. [Selectable items] : Turn night mode off. : Low setting. : Middle setting. HIGH : High setting. Operating from the main remote control unit Press the NIGHT button. HIGH h Audio Delay Compensate for mismatched timing between video and audio.

  • Page 43: Hdmi Information

    HDMI Information Shows information about HDMI input signals and monitor. F Menu screen F 5.Information 5-3.HDMI Signal Info. 1.Status 2.Audio Input Signal Resolution 3.HDMI Information 480p 4.Auto Surround Mode 5.Quick Select Color Space 6.Preset Station RGB 4:4:4 Pixel Depth 8bits 5-3.HDMI Monitor Info.

  • Page 44: Playback

    ENGLISH SOURCE SELECT BAND SHIFT <SOURCE> <PHONES> MASTER VOLUME <POWER> PRESET CHANNEL <ON/STANDBY> <SPEAKER> TUNING [Front] [OFF] [ON/SOURCE] SHIFT PRESET SOURCE SELECT CHANNEL [TUNER] MASTER VOLUME [MUTING] [MODE [MODE SELECTOR 1] SELECTOR 2] [Rear] [TUNER] SOURCE SELECT TUNING [MODE] BAND [MEMORY] About the button names in these explanations <...

  • Page 45: Playing Video And Audio Equipment

    Playing Video and Audio Equipment Basic Operation Prepare the equipment. q Load the DVD, CD or other software in the player. (vSee the operating instructions of the respective devices.) w To play a video device, switch the monitor input. (vSee the monitor’s operating instructions.) SOURCE SELECT to select the input source.

  • Page 46: Listening To Xm Satellite Radio Programs

    ENGLISH <SOURCE SELECT> STATUS <ON/STANDBY> TUNING [Front] [iPod] [SAT TU] uiop STATUS [MODE [MODE SELECTOR 1] SELECTOR 2] [Rear] [iPod] [SAT TU] TUNING uiop About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Listening to XM Satellite Radio...

  • Page 47: Checking The Xm Signal Strength And Radio

    Basic Operation Make the necessary preparations. q S et the iPod in the DENON Control Dock for iPod. (vSee the Control Dock for iPod’s operating instructions.) w Assign the Control Dock for iPod’s input. MENU : ”Input Setup” – “Assign” – ”iPod dock”...

  • Page 48: Listening To Music

    [ENTER] pressing STATUS during playback. • On the AVR-1908, folder and fi le names can be displayed as titles. Any characters that cannot be displayed are replaced with “ . (period)” . • The time for which the on-screen display are displayed can be set at menu “Manual Setup”...

  • Page 49: Other Operations And Functions

    Other Operations and Functions Other Operations Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. <ZONE2 / REC SELECT> Press “ZONE2 SOURCE” is shown on the display. ZONE2 SOURCE ZONE2 TUNER ····...

  • Page 50: Quick Select Function

    ENGLISH <SPEAKER A> <SPEAKER B> <POWER> <QUICK SELECT> About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Quick Select Function With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in...

  • Page 51: Remote Control Unit Operations

    Presetting • DENON and other makes of components can be operated by setting the preset memory. • This remote control unit can be used to operate components...
  • Page 52 ENGLISH Functions of Buttons by Component n Front [ON/SOURCE] [OFF] [SHIFT] [CHANNEL+/–] [1], [2], [3], [A/B], [0], [DISC SKIP +/ FAVORITE], [6 7], [SETUP], [uiop], [8 9], [AUDIO], [ENTER], [VCR CH+/–] [DISPLAY], [RETURN], [MENU] [MODE [MODE SELECTOR 1] SELECTOR 2] Device CD Player iPod...
  • Page 53 SUBTITLE DISPLAY – – – – RETURN – – – – Default DENON DENON setting – – (111) (151) (Preset code) Special – Remarks GSpecial RemarksH q Only one device can be set in the preset memory for each mode. Also, when a new code is preset, the previous code is automatically deleted.

  • Page 54: Punch Through Function

    DVD/VDP No setting Sub Remote Control Unit The sub remote control unit (RC-1085) included with the AVR-1908 can be used as the exclusive multi-zone remote control unit. b The following describes operation for the selected zone. • Turning the multi-zone power on and off •...

  • Page 55: Amp Assign / Multi-Zone Connections And Operations

    Multi-zone Settings with the Amp Assign Function The amp assign function lets you assign the amplifiers for the different channels built into the AVR-1908 to the speaker outputs for the different zones. Select the desired playback environment from among “Setting 1” to “Setting 4” , then set the corresponding “Amp Assign”...
  • Page 56 ENGLISH Setting 2 : 7.1-channel playback Main zone FL SW Amp Assign mode: 7 .1ch 7 .1ch n Amp Assign mode setting and speakers connected to the various speaker terminals Speaker terminal FRONT CENTER Amp Assign mode 7 .1ch Setting 3 : 5.1-channel playback 2-channel playback Switching ················Surround Mode switching...

  • Page 57: Multi-Zone Settings And Operations With Zone Output

    Main zone (7.1-channel system) DVD player SURR. BACK / AMP Remote SURR ASSIGN control unit FL -A/FR-A Bi-Amp connection FL -B/FR-B Bi-Amp connection Audio signals ZONE2 OUT Stereo ZONE2 Monitor Pre-main amplifier AVR-1908 ZONE2 Input audio output : Multi-zone audio cable ENGLISH...

  • Page 58: Multi-Zone Operations

    ENGLISH SOURCE SELECT VOLUME <ZONE2 ON/OFF> <ZONE2/REC SELECT> [Front] SOURCE [ZONE2 OFF] SELECT [ZONE2 ON] [MAIN OFF] [MAIN ON] SOURCE VOLUME SELECT [MUTING] [MODE SELECTOR 2] [MODE SELECTOR 1] (Main remote control unit) [ZONE2 OFF] [ZONE2 ON] SOURCE SELECT VOLUME [MUTING] (Sub remote control unit) About the button names in these explanations...

  • Page 59: Other Information

    Other Information About Speaker Installation Surround back speakers Sound positioning directly to the rear can be achieved easily by adding a surround back speaker to a 5.1-channel system. In addition, the acoustic image extending between the sides and the rear is narrowed, thus greatly improving the expression of the surround signals for sounds moving from the sides to the back and from the front to the point directly behind the listening position.

  • Page 60: Dolby Surround

    G As seen from the side H Surround The AVR-1908 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.

  • Page 61: Audyssey Multeq

    Neural Surround Neural Surround™, a breakthrough in audio technology, will bring the excitement of surround music to more of America’s listening audience. It provides the rich envelopment and discrete image detail of surround sound in a format 100 % compatible with stereo. With superior spectral resolution and channel separation, Neural Surround™...

  • Page 62: Surround Modes And Parameters

    ENGLISH Surround Modes and Parameters Channel output Surround mode Front L/R Center Surround L/R PURE DIRECT, DIRECT MULTI CH DIRECT STEREO EXT. IN MULTI CH IN DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DTS NEO:6 DOLBY DIGITAL DTS SURROUND neural 7CH STEREO ROCK ARENA...
  • Page 63 Parameter (default values are shown in parentheses) Surround mode PRO LOGIC g/gx MUSIC mode only CENTER PANORAMA DIMENSION WIDTH PURE DIRECT, DIRECT MULTI CH DIRECT STEREO EXT. IN MULTI CH IN DOLBY PRO LOGIC gx S (OFF) S (3) S (3) DOLBY PRO LOGIC g S (OFF) S (3)
  • Page 64 ENGLISH Differences in Surround Mode Names Depending on the Input Signals Button Note Surround mode STANDARD DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DTS SURROUND DTS 96/24 DTS + PLgx CINEMA DTS + PLgx MUSIC DTS + NEO:6 DTS NEO:6 CINEMA DTS NEO:6 MUSIC DOLBY SURROUND DOLBY DIGITAL EX...
  • Page 65 Button Note Surround mode ANALOG DIRECT DIRECT MULTI CH DIRECT M DIRECT + PLgx CINEMA M DIRECT + PLgx MUSIC M DIRECT 7 .1 DSP SIMULATION 7CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX VIRTUAL STEREO STEREO NOTE : 1: This mode is not available when the surround back speaker setup is set to “None”...

  • Page 66: Relationship Between Video Signals And Monitor Output

    ENGLISH Relationship Between Video Signals and Monitor Output Input signals Video convert HDMI COMPONENT S-VIDEO S : Signal input A : No signal • The main zone video conversion function is compatible with the following format: NTSC, PAL, SECAM, NTSC4.43, PAL -N, PAL-M and PAL-60. •...
  • Page 67 S-VIDEO Input signals Video convert MONITOR OUT HDMI COMPONENT S-VIDEO — — — Used Not used — — — Used Not used — — — Used Not used — — — Used Not used S : Signal input A : No signal MONITOR OUT VIDEO HDMI...

  • Page 68: Troubleshooting

    • Set is damaged. • Turn off the power and contact a DENON service center. Cause Countermeasure • Batteries are worn. • Replace with new batteries. • You are operating outside of the •...
  • Page 69 • DVD player is not compatible • Use a DTS-compatible player. with DTS sound playback. • The AVR-1908’s “Input Mode” • Set to the “Auto” or “DTS” setting is set to “PCM” . mode. HDMI audio • The “Manual Setup” – “HDMI •...
  • Page 70 • Control Dock for iPod’s AC adapter is not connected to power outlet. GXM Satellite RadioH Symptom Cause ”CHECK • AVR-1908’s XM connector and ANTENNA” is the XM Mini-Tuner and Home displayed in the Dock is not properly connected. XM mode. ”NO SIGNAL ” is •...

  • Page 71: Specifications

    Specifications Audio section • Power amplifier Rated output: Front (A, B): 90 W + 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 120 W + 120 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
  • Page 72 List of preset codes / Liste de codes préréglés DVD Player Curtis Mathes Cybernex Aiwa Denon 014, [111] Daewoo Hitachi Daytron 006, 011 Konka 012, 013 Dumont Magnavox Dynatech Mitsubishi Electrohome Panasonic Electrophonic Philips 005, 015, 016, 017 Pioneer 003, 008...

  • Page 73: Satellite Receiver

    011, 012, 013, 018, 021 002, 003, 022 Aiwa 001, 035, 043 Burmster Carvery 003, 035 014, 023 [111]*, 044 Denon 004, 024, 025 Emerson 004, 005, 006, 007 Fisher 003, 008, 009, 010 018, 019 Kenwood 011, 012, 013, 014, 017 DVD preset codes / Codes préréglés DVD...
  • Page 74 Denon Brand Company, D&M Holdings Inc. Printed in China 00D 511 4630 109...

Table of Contents

Save PDF