Channel Swap - COMPRO V150 - START UP GUIDE Manual

(Picture)
Resolution
Refresh Rate
Noise Reduction Adjust level of noise reduction. (0~8) Default is 4
OptiRatio
Display Type
Input Source
Position Finetune
(Picture)
OSD Position
OSDTransparency 1
Language
Information
Reset All Settings NO/YES
Country/Region
(Picture)
Volume
Treble
Bass
Dynamic Bass
Boost
Stereo Effect
SAP Mode
Reset

Channel Swap

To swap the channel numbers, please select Channel Swap from the menu
then select YES, and it will show as a sub menu. Once you have entered this
menu, you will see a list of channels. You may browse with the direction keys;
Up and Down are going through the list while Left and Right are changing
(TV) (Monitor)
640*480 800*600
1280*1024 1400*1050
60Hz (default) 75Hz
4:3 16:9
LCD (default)
TV AV (Composite) S-Video FM PC
Use right and left direction key to adjust the position of
screen
(TV) (Monitor)
Use direction keys to move OSD position
2 3 4
Select your language (Default is your local country)
VideoMate V150F/V150 Version information
(1 Cancel / 2 Reset All Settings)
Select your country or region
(TV) (Monitor)
Adjust volume (0-50)
Adjust Treble volume (0-15)
Adjust Bass volume (0-15)
ON/OFF (Default is OFF)
Adjust Stereo Effect (0~8)
ON/OFF (Default is OFF)
(Only appears in PAL/SECAM TV system area)
Reset sound settings (NO/YES)
(OSD)
1024*768 (default) 1280*720
1440*900
SmartZoom Panorama
CRT PDP
(OSD)
(OSD)
Default : 0
(Sound)
Full
(Sound)
(Sound)
11