Factory Reset - DigiTech VOCALIST LIVE 4 Owner's Manual

Factory Reset

If you want to restore the Vocalist
the Factory Reset function. This will:
• Copy all Factory presets to the corresponding User presets, overwriting all changes you
may have made to the user presets
• Restore the state of the Utility parameters to the factory defaults (FXFS ALL, HARMFS
TOG, GTRSENS LO)
• Set the Stereo/Mono state to Stereo
To perform a Factory Reset procedure
. If you are editing a preset, press the Up or Down footswitch to exit edit mode.
2. Press and hold the Major/Minor button and then press and release the Store button.
The display will read FAC RESET- WILL ERASE ALL YOUR PRESETS... , then
STORE=RST.
3. Press the Store button again to continue with the factory reset. If you don't want to do
the factory reset, just wait 5 seconds, or press almost any other button, to cancel.
24
Live 4 to the state it was in when first delivered, you can use
®