European Contact: Your local DigiTech Sales and Service Office or not operate normally, or has been dropped. 11.WARNING:To reduce the risk of fire or electric shock, Harman Music Group do not expose this apparatus to rain or moisture.
Page 3
6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tam- pered with by anyone other than a certified DigiTech technician or, if the product is used with AC volt- ages outside of the range suggested by the manufacturer.
The Grunge pedal has a legendary status few pedals have ever attained. Designed for cutting edge guitarists who want a unique sound, the Grunge provides the tones today’s music requires.Whether it’s chunky rhythm, heavy grind, or amazing sustaining leads you're after, the Grunge gets you these and everything in between.
Page 6
Controls the boost or cut of high frequencies. Turn this knob clockwise to increase the high frequency content, and counter-clockwise to decrease the high frequency content. 5. Grunge Knob Controls the amount of distortion. Turn this knob clockwise to increase the amount of distortion, and counter-clockwise to decrease the amount of distortion.
11. Out 2 (Mixer) Jack This output features DigiTech’s speaker cabinet emulation, that lets you run the pedal directly into a mixer or recorder input without having to use a guitar amplifier.
Page 8
Connections The Grunge has a single input (INPUT) and a pair of outputs (AMP and MIXER). The two outputs give you the following options: running into a guitar amplifier, running directly to a mixing console or recording device, or both. The MIXER output uses DigiTech’s speaker cabinet emulation for an authentic guitar amplifier sound without using an amp.
Battery Replacement 1. Using the tip of a 1/4” guitar cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable.
Need help?
Do you have a question about the GRUNGE and is the answer not in the manual?
Questions and answers