Retrieve And Read E-Mail - Nokia 770 - 770 Internet Tablet User Manual

4. Account setup 3/4
Incoming server — Enter the host name or IP address of the POP3 or
IMAP4 server that receives your e-mail.
Outgoing server (SMTP)
server through which your e-mail is sent. Tap Next.
Simple mail transfer protocol (SMTP) servers are used when sending
e-mail. To be able to send e-mail, you must define the SMTP host
name or IP address, which you obtain from the service provider of the
connection you use.
Use connection-specific SMTP servers:
want to use connection specific SMTP servers for sending e-mail
messages.
Tip: The SMTP host name or IP address may be different from
the host name or IP address of the incoming server (POP3 or
IMAP4). For example, when you access your Internet service
provider e-mail over a cellular network, you may need to
utilize the SMTP server of the cellular network. Thus, you may
need to configure as many mailboxes as you have Internet
access networks, each mailbox having a different SMTP host
name or IP address.
5. In Account setup
Advanced to define optional e-mail settings.

Retrieve and read e-mail

E-mail sent to you is not automatically received by your device, but by
your remote mailbox on the e-mail server. To read your e-mail, you must
first connect to the mailbox and retrieve the e-mail messages to your
device.
To retrieve e-mail from a remote mailbox, select
Send & receive. Select to retrieve e-mail from all mailboxes or from a
selected mailbox. If you have e-mail in the
messages are sent simultaneously.
To open a message, tap twice the header of the message you want to
read.
Copyright © 2006 Nokia. All rights reserved.
C o m m u n i c a t e o v e r t h e W e b
— Define the following settings:
— Enter the host name or IP address of the
4/4, tap Finish to complete the mailbox setup, or
— Select this option if you
E-mail > E-mail
Outbox folder, these
>
33